Table of Contents
Advertisement
8 Rapid heating
To save time, you can use rapid heating to shorten the
preheat time.
Only use rapid heat-up when a temperature of over
100 °C has been set.
After rapid heating, it is best to use the following types
of heating:
¡ 3D hot air
¡ Top/bottom heating
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
With the
button, select the different time-setting op-
tions.
Time-setting
Use
option
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time
If you set a cooking time, operation
of the appliance stops automatically
once this time has elapsed.
End time
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
You can set the time.
9.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Press the
button repeatedly until
1.
in the display.
Use the
or
button to set the timer duration.
2.
Button
Default value
5 minutes
10 minutes
The timer duration can be set in 30-second incre-
ments up to 10 minutes. Above 10 minutes, the
time increments become longer the higher the
value.
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
1.
2.
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
3.
4.
a The timer starts and the timer duration begins to
a An audible signal sounds and the timer duration is
3.
Changing the timer
You can change the timer duration at any time.
Requirement: is highlighted on the display.
▶
a The appliance applies the change after a few
Cancelling the timer
You can cancel the timer duration at any time.
Requirement: is highlighted on the display.
▶
a After a few seconds, the appliance applies the
9.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and temperature or
setting are set.
1.
2.
is highlighted
a The appliance starts heating and the cooking time
a If the cooking time has elapsed, an audible signal
Use the function selector to select rapid heating .
Use the temperature selector to set the required
temperature.
signal sounds and the heating indicator goes out.
Use the function selector to set a suitable type of
heating.
Place the food in the cooking compartment.
count down after a few seconds.
zero in the display when the timer duration has
elapsed.
Once the timer duration has elapsed:
Press any button to switch off the timer.
‒
Use the
or
button to change the timer duration.
seconds.
Use the
button to reset the timer duration to zero.
change and
goes out.
Press the
button repeatedly until
in the display.
Use the
or
button to set the cooking time.
Button
Default value
10 minutes
30 minutes
The cooking time can be set in 1-minute increments
up to 1 hour, and then in 5-minute increments.
counts down after a few seconds.
sounds and the display shows the cooking time as
zero.
Rapid heating en
is highlighted
11
Advertisement
Table of Contents
