Plug & Light
Power supply Plug & Light
Power supply Plug & Light
Art. no.: PL 08 U
Operating instructions
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
The product contains a magnet that may interfere with the function of electronic implants, such
as pacemakers and insulin pumps.
Persons with electronic implants should not wear the product close to their body, e.g. in trouser
or shirt pockets. Maintain a minimum distance of 10 cm between the product and electronic im-
plants.
Risk of suffocation by swallowing small parts. Make sure that the magnets for dismantling a light
attachment do not fall into the hands of children.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
The product contains a magnet that can damage electronic devices such as laptops, hearing
aids, and data carriers such as credit cards, as well as mechanical watches and speakers.
Maintain a minimum distance of 10 cm between the product and any listed devices and data
carriers.
These instructions are an integral part of the product, and must remain with the end customer.
2
Device components
(1)
Flush-mounted insert (scope of supply)
(2)
Frame
(3)
Cover (accessory)
(4)
Screw for fastening the cover
(5)
Light attachment (example)
The light socket is the combination of a cover (3) and flush-mounted insert (1).
3
Intended use
–
Ballast for switching and dimming light attachments from the Plug & Light system
82401043
J0082401043
Figure 1
1 / 6
08.04.2020
Need help?
Do you have a question about the PL 08 U and is the answer not in the manual?
Questions and answers