Cisco Firepower 4100 Manual page 13

Overview
1
3
5
7
9
For More Information
40-Gb Network Module
The following figure shows the front panel of the 40-Gb network module (FPR4K-NM-4X40G.) The
FPR4K-NM-4X40G is a single-wide module that supports hot swapping. The four ports are numbered left to
right.
Note
Note
Captive screw/handle
Ethernet X/3
Ethernet X/7
Ethernet X/4
Ethernet X/8
• For a list of copper SFPs, see
Make sure you have the correct firmware package and software version installed to support this network
module. For instructions on how to verify your firmware package version and to upgrade the firmware
if necessary, see the Cisco Firepower 4100/9300 FXOS Firmware Upgrade
4100/9300 FXOS Compatibility
The FPR4K-NM-4X40G is NEBS-compliant.
2 Ethernet X/1
4 Ethernet X/5
6 Ethernet X/2
8 Ethernet X/6
Network activity LEDs
10
• Off—No connection or port is not in use.
• Amber—No link or network failure.
• Green—Link up.
• Green, flashing—Network activity.
Supported SFP/SFP+ and QSFP Transceivers, on page
for the software compatibility matrix.
40-Gb Network Module
25.
Guide. See Cisco Firepower
Overview
13