Upload The Program; Tutorials; Please Read; Operating Voltage - Arduino MKR Vidor 4000 Getting Started

Go to File on the Arduino Software (IDE) and open the Examples tree; select 01. Basic and
then Blink
This sketch just flashes the built in LED connected to Digital pin LED_BUILTIN at one
second pace for on and off, but it is very useful to practice the loading of a sketch into the
Arduino Software (IDE) and the Upload to the connected board.

Upload the program

Press the second round icon from left on the top bar of the Arduino Software (IDE) or press
Ctrl+U or select the menu Sketch and then Upload. Please note that the time required to
load the sketch and the FPGA bitstream might be more than 30 seconds. If you want to get
more information about the upload process, you may activate in the preferences the show
verbose output during: option for upload.
The sketch will be compiled and then uploaded.
After a few seconds the bottom bar should show
Done Uploading.
You have successfully set up your MKR Vidor 4000
board and uploaded your first sketch. You are ready
to move on with our tutorials and projects: choose
your next destination below.

Tutorials

Now that you have set up and programmed your MKR Vidor 4000 board, you may find
inspiration in our Project Hub tutorial platform.
Here a list of tutorials that will help you in making very cool things!
Learn the basics of FPGA programming
Adding mores Serial interfaces to SAMD microcontrollers
More examples on the following library pages:
Scheduler - Manage multiple non-blocking tasks.
AudioFrequencyMeter - Sample an audio signal and get its frequency back
I2S - To connect digital audio devices together

Please Read

In this section we have collected some information that is worth reading to use your MKR
Vidor 4000 board properly. Some behaviors differ from the Uno board and if you come from
a former experience with that board, it is worth spending a few minutes reading through
these notes. If this is your first board, we suggest you have a look at them anyway.

Operating Voltage

4/8