Subscribe to Our Youtube Channel
Related Manuals for Sentera Controls SPV-8-010-PM
Summary of Contents for Sentera Controls SPV-8-010-PM
- Page 1 SPV-8-010-PM 230 VAC POTENTIOMETER WITH MODBUS RTU Mounting and operating instructions...
- Page 2 INTENDED AREA OF USE TECHNICAL DATA STANDARDS OPERATIONAL DIAGRAMS WIRING AND CONNECTIONS MOUNTING INSTRUCTIONS IN STEPS OPERATING INSTRUCTIONS TRANSPORT AND STORAGE WARRANTY AND RESTRICTIONS MAINTENANCE MIW-SPV-8-010-PM-EN-000 - 14 / 09 / 2020 2 - 8 www.sentera.eu back to the table of contents...
- Page 3 In case there are any questions that are not answered, please contact your technical support or consult a professional. MIW-SPV-8-010-PM-EN-000 - 14 / 09 / 2020 3 - 8 www.sentera.eu...
- Page 4 WITH MODBUS RTU PRODUCT DESCRIPTION The SPV-8-010-PM potentiometer is intended for stepless control of EC motors requiring a 0—10 VDC, 0—20 mA or 0—100 % PWM control signal. The minimum output values can be adjusted via Modbus within the ranges: 0—4 VDC / 0—8 mA / 0—40 % PWM and the maximum output values –...
- Page 5 Do the wiring according to the wiring diagram (see Fig. 1 Wiring and connections). Mount the internal enclosure into the wall according to the mounting dimensions shown in Fig. 2 Mounting dimensions - flush mounting. MIW-SPV-8-010-PM-EN-000 - 14 / 09 / 2020 5 - 8 www.sentera.eu...
- Page 6 Mount the external enclosure onto the surface by means of the screws and dowels adhering to the mounting dimensions shown in Fig. 3 Mounting dimensions - surface mounting. MIW-SPV-8-010-PM-EN-000 - 14 / 09 / 2020 6 - 8 www.sentera.eu back to the table of contents...
- Page 7 Sensistant (Holding register 9). Example 1 Example 2 Slave 1 Master ТX ТX Master Slave 2 Slave n Slave 1 Slave n Slave 2 MIW-SPV-8-010-PM-EN-000 - 14 / 09 / 2020 7 - 8 www.sentera.eu back to the table of contents...
- Page 8 In case of heavy pollution, clean with a non-aggressive product. In these circumstances the unit should be disconnected from the supply. Pay attention that no fluids enter the unit. Only reconnect it to the supply when it is completely dry. MIW-SPV-8-010-PM-EN-000 - 14 / 09 / 2020 8 - 8 www.sentera.eu...
Need help?
Do you have a question about the SPV-8-010-PM and is the answer not in the manual?
Questions and answers