Download Print this page

Honeywell Smart Seal P3S Operating Instructions

Acoustic detector

Advertisement

Quick Links

 
1000560805-002-00
EN
www.docuthek.com
Operating instructions
Acoustic detector for Smart Seal P3S
Contents
Operating instructions
Acoustic detector for Smart Seal P3S ............ 1
Contents ............................................................ 1
Changes ............................................................ 1
Safety ................................................................. 1
Checking the usage.......................................... 2
Commissioning................................................. 2
Operating the detector ..................................... 3
Maintenance ...................................................... 3
Spare parts ........................................................ 4
Technical data .................................................. 4
Identification ..................................................... 4
Logistics ............................................................ 4
Contact .............................................................. 4
Changes
First edition
Safety
Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Following
the installation, pass the instructions on to the
operator. This unit must be used and operated in
accordance with the regulations and standards in
force. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
1
2 3
,
,
,
... = Action
Liability
We will not be held liable for damage resulting from
non-observance of the instruction and non-com-
pliant use.
Safety instructions
Information that is relevant for safety is indicated
in the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by
qualified technicians. Electrical interventions may
only be carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use
OEM or approved spare parts.
EN‐1 
= Instruction

Advertisement

loading

Summary of Contents for Honeywell Smart Seal P3S

  • Page 1 … = Action = Instruction Contents Liability Operating instructions Acoustic detector for Smart Seal P3S .... 1 We will not be held liable for damage resulting from non-observance of the instruction and non-com- Contents ............1 pliant use. Changes ............1 Safety instructions Safety ..............
  • Page 2 Commissioning Acoustic detector for checking the originality and Insert batteries integrity of Elster Smart Seal P3S which contains Unscrew 3 screws on the bottom housing a Secure Marker, the presence of which can be (underside) of the detector. Use a standard verified using the acoustic detector.
  • Page 3 Sound (beep): detector response Position the acoustic detector in front of the Smart Seal P3S so that the infrared beam hits The secure marker is being detected; the the wide surface of the Smart Seal P3S. tested seal is the original Elster Smart Seal P3S.
  • Page 4 Batteries are to be disposed of separately. Reduce the distance between the acoustic WEEE Directive 2012/19/EU – Waste Electrical detector and Smart Seal P3S to less than 3 cm. and Electronic Equipment Directive Clean the Smart Seal P3S surface only with a At the end of the product life, dispose the damp cloth.