Electrolux KOFGH40X User Manual page 4

Hide thumbs Also See for KOFGH40X:
Table of Contents

Advertisement

Available languages

Available languages

4
www.electrolux.com
This appliance may be used in, offices, hotel guest
rooms, bed & breakfast guest rooms, farm guest
houses and other similar accommodation where such
use does not exceed (average) domestic usage levels.
Only a qualified person must install this appliance and
replace the cable.
Do not use the appliance before installing it in the
built-in structure.
Disconnect the appliance from the power supply
before carrying out any maintenance.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical
hazard.
The means for disconnection must be incorporated in
the fixed wiring in accordance with the wiring rules.
WARNING: Ensure that the appliance is switched off
before replacing the lamp to avoid the possibility of
electric shock.
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements or the surface of the
appliance cavity.
Always use oven gloves to remove or insert
accessories or ovenware.
To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can
scratch the surface, which may result in shattering of
the glass.

Advertisement

Table of Contents
loading

Table of Contents