Advertisement
- Do not use the spray in a closed room, in a dangerous area (by example area with the
presence of chemical product, fire).
- In the event of accidents or blockages, stop immediately to use the tool. Remove the
battery. Check the tool in case of damage. Remove the blockage in a safe way. If the
tool is damaged, do not use it again and bring it to a service client.
- When restarting the sprayer after wintering: check the level of battery and charge it if
necessary. Let the tool run in neutral for a few minutes.
- When a nozzle is blocked, stop to use the tool. Disassemble the nozzle and clean it to
remove the blockage.
- Never come in contact with chemical products. In case of inhalation, stop to use the
tool; go immediately in a place where fresh air is present. In case of contact with the
skin, rinse abundantly with clean water. During use, filling, draining, cleaning or
servicing, handle the lance in a safe way; avoid contact with chemical agent. Use
protective gloves.
- Always use accessories and batteries recommended by the manufacturer. Contact the
manufacturer for advice for spare parts and accessories (see in the end of this manual).
- Avoid drift taking into account different parameters such as nozzles, pressure, boom
height, wind speed, etc.
- Do not use plant protection products
- Do not connect this sprayer to other equipment.
The precautions are divided into three categories: "DANGER", "WARNING" and
"CAUTION".
If there is a possibility of serious injury or death in case of violation of
the indication
DANGER!
If there is a possibility of serious injury or serious injury in case of
violation of the indication
WARNING!
Advertisement
