Advertisement
fter-use check and storage
1) After-use check
• Withdraw the liquid remaining in the tank. Wash the tank inside with clean water thoroughly.
• Fill the tank with fresh water and operate the pump for 3-4 minutes. Spray the water
so that the inside of filter, hose and nozzle would be well washed.
• Turn o the power switch and pressure control switch after washing.
2) Daily check
• Check all joining parts and tighten. Make sure no part is untied and separated.
• Make sure there is no damage on the buckle and the connection parts of the shoulder
strap.
• Make sure there is no damage on spraying hose and the connection parts
between main body and the handle.
• Check for any foreign substance in the f i lters inside tank. Wash
periodically. Refer to the f i gure below.
1)
Open the tank cap and separate the cap f i lter.
2)
Separate the tank f i lter from the nipple in the bottom of tank inside.
3)
Separate the f i lter mesh from the f i lter body and clean it thoroughly.
4)
After cleaning, attach the f i lter mesh to the inside groove of filter body and join it to
the nipple.
tank cap
nipple
cap f i lter
filter
body
filter mesh
Advertisement
