Advertisement
• Please attach to the main body as
a.
Place the filter in the hole of the main body
b.
Screw the tank cap to the main body.
c.
Install the spray pipe holder to the main
body.
d.
Install the spray pipe into the spray pipe
holder.
e.
Join the buckle at the lower end of the
shoulder strap as shown in the figure.
Insert the pressure control knob to the pressure control switch
shaft in the main body as shown in the figure.
Caution
• Before use, adjust the shoulder strap as following.
a. Make sure that the upper part and the lower part of the shoulder strap are not twisted
and f i r mly joined.
b. Adjust the length of the shoulder strap to the user. Use the length-adjusting
strap in the lower end as shown in the figure.
c. Adjust the chest belt to the user. Use the length-adjusting strap and join the buckle as
shown in the figure.
follow:
Please join the hose to the main
body tightly so that the liquid
would not leak
spray pipe hol
shoulder
strap
length-adjusting strap
tank cap
buckle
shoulder
strap
Advertisement
