Download Print this page

Frequently Asked Questions - Projecta SPP160K Quick Start Manual

12 volt solar panel kits monocrystalline

Advertisement

FREQUENTLY ASKED QUESTIONS

Q. Can the solar panel be mounted on a flat roof or wall?
A. Yes. It is fine to mount the panel on a horizontal surface such as a roof or on a vertical surface
like a wall as long as the panel receives full sun for a reasonable period of the day. You will
however gain better performance if the panel is tilted toward the sun and faced in a northerly
direction, since this enables the maximum amount of solar energy to reach the panel.
Q. What current output can I expect?
A. The current output of the solar panel is based mostly on the available solar energy (sun rays).
The current ratings given in the specifications table are based on the 'ideal' sunlight conditions.
In reality this may be achieved only on a very bright sunny day. The normal current output will
therefore be a little lower. If the panel is shaded or if it is a very hot day the output will
decrease further.
Q. Will it charge my flat battery & how long will it take?
A. The SPP160K will charge a flat battery (above 9V) 500-1800CCA (Automotive) with a charge
time of 7-35Hrs.
Q. I am going on a 4WD trip, will 160 Watts be enough?
A. It really comes down to how many appliances are drawing power from your battery.
For example:
Most people when they go away would run a Fridge, and a couple of lights to cook with etc.
We need to work out how much power would be used in a day.
Energy consumption per day
Appliance
Current use/hour (Ah)
Fridge
1.5
3 Lights
3
Grand Total
If we say we get around 10 hours of solar energy from the panels per day (for summer months).
We can then calculate what size and how many panels we need.
45 Amps ÷ 10 hours = 4.5 Amps per hour
So the SPP160K solar panel kit produce 10.2 Amps an hour, this should be more than
enough.
Total time of use/day (Hours)
24
3
Total Current per day (Amps)
36
9
45
7

Advertisement

loading