InHand InGateway974 Quick Start Manual
  1. Manuals
  2. Brands
  3. InHand Manuals
  4. Gateway
  5. InGateway974
  6. Quick start manual

InHand InGateway974 Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
InGateway974 Quick Start Manual
This document contains the introduction, installation, and basic configuration of InGateway974 (IG974) such as
networking, software version update, etc., so that users can easily master the basic configuration of the IG974
and the use of common functions.
1.
Introduction of IG974
1.1 Overview
1.2 Accessories List
1.3 Panel & Dimensions
•
Panel
•
Dimensions
1.4 Panel Indicators
•
LED Indicators
•
Signal Status Indicators
2.
Installation
2.1 Install Notice
2.2 Rail Mounted and Dismounted
•
Rail mounted equipment
•
Rail dismounted equipment
2.3 Wall Mounted and Dismounted
•
Wall mounted
•
Wall dismounted
2.4 SIM Card Installation
2.5 Antenna Installation
2.6 Power Supply Installation
2.7 Protective Ground Installation
2.8 Network Cable Connection
2.9 Terminal Connection
3.
IG974 Network Parameters Configuration
3.1 Access IG974
3.2 Connect to the Internet
4.
Software Version Upgrade
4.1 IG974 firmware version upgrade
4.2 IG974 Python SDK version upgrade
4.3 IG974 Docker SDK version upgrade
5.
Python Edge Computing
5.1 Install and operate Python App
5.2 Python App running configuration upgrade

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the InGateway974 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for InHand InGateway974

Summary of Contents for InHand InGateway974

  • Page 1 InGateway974 Quick Start Manual This document contains the introduction, installation, and basic configuration of InGateway974 (IG974) such as networking, software version update, etc., so that users can easily master the basic configuration of the IG974 and the use of common functions.

  • Page 2: Accessories List

    1. Introduction of IG974 1.1 Overview The InGateway974 (IG974) series is the new generation industrial-grade 5G edge computing gateway launched by InHand for the industrial IoT. The product provides high-speed, uninterrupted Internet access base on 5G network and multiple broadband services. The IG974 supports a variety of mainstream industrial protocols including Modbus TCP/RTU and can be connected to mainstream IIoT cloud platforms including AWS and Azure, ensuring on-site devices can easily log into the cloud.
  • Page 3 Item Quality Description Gateway InGateway974 Resources QR code quick installation manual, user manual Rail-mounted Installation Fixed gateway metal clips Accessory Terminal 2-pin power terminal and 6-pin serial port terminal Network Cable 1.5m Antenna 5G Antenna Product Warranty Card The warranty period is 1 year...

  • Page 4: Panel & Dimensions

    1.3 Panel & Dimensions 1.3.1 Panel Introduction IG974 panel introduction is shown below (IG974 series products have a variety of panel appearance form, but the installation method is the same, the specific panel condition please subject to the physical). 1.3.2 Dimensions The dimensions of IG974:...
  • Page 5 1.4 Panel Indicators 1.4.1 LED Indicators...

  • Page 6: Installation

    IG974-Quick-Start-Manual-EN.md 2023/2/7 WARN Description (Power Indicator- (Status Indicator- (Warning (Error Indicator- (Network Red) Green) Indicator-Yellow) Red) Indicator-Green) Light on Light off Light off Light off Light off Start-up Light on Slow Blink Light off Light off Light off Start-up successful Light on Slow Blink Light off...
  • Page 7 IG974-Quick-Start-Manual-EN.md 2023/2/7 the installation needs to consider the surrounding environment and should be installed in a restricted area. ⚫ Avoid direct sunlight and stay away from heat generating sources or areas with strong electromagnetic interference. ⚫ Gateway products need to be mounted on industrial rails. ⚫...
  • Page 8 IG974-Quick-Start-Manual-EN.md 2023/2/7 2.3 Wall Mounted and Dismounted 2.3.1 Wall mounted The specific steps for installing the IG902 are as follows. 1. Select the installation location of the device and make sure there is enough space. 2. Mount the wall mounting plate on the back of the device with a screwdriver, as shown in the figure below：...

  • Page 9: Antenna Installation

    IG974-Quick-Start-Manual-EN.md 2023/2/7 IG902 supports dual SIM cards, use a screwdriver to twist off the fixing screw on the card holder cover and then install the SIM card, as shown below. 2.5 Antenna Installation Gently turn the movable part of the metal SMAJ interface by hand until it can't be turned (at this time you can't see the external thread of the antenna connection), don't hold the black rubber sleeve and screw the antenna.

  • Page 10: Network Cable Connection

    IG974-Quick-Start-Manual-EN.md 2023/2/7 In general, only the ANT antenna can be used, when the signal is not good enough to enhance the signal, only when using the ANT antenna at the same time use the AUX antenna. Power Supply Installation The specific steps for installing the IG902 power supply are as follows. 1.

  • Page 11: Terminal Connection

    IG974-Quick-Start-Manual-EN.md 2023/2/7 2.9 Terminal Connection The terminal provides RS232/RS485 two interface modes, you need to connect the corresponding cable to the terminal before use. When installing, remove the terminal from the device, loosen the locking screw on the terminal, insert the corresponding cable into the terminal and then lock the screw tightly.
  • Page 12 IG974-Quick-Start-Manual-EN.md 2023/2/7 ⚫ Step 1: The default of IG974 WAN port is DHCP; the default IP address of LANX port is 192.168.2.1. This document takes accessing IG974 through LANX port as an example and sets the IP address of PC and LANX port in the same network segment. ◼...
  • Page 13 IG974-Quick-Start-Manual-EN.md 2023/2/7 ⚫ Step 2: Open a browser and access the IG974's LAN port IP address and enter the login username and password. The default user name/password shipped with the device is adm/123456. 13 /...
  • Page 14 IG974-Quick-Start-Manual-EN.md 2023/2/7 ⚫ Step 3: After successful login, you can see the webpage as shown below. ⚫ Step 4: To change the user name and password of WEB management interface, please visit "System>>User Management" page to set a new user name and password. ⚫...
  • Page 15 IG974-Quick-Start-Manual-EN.md 2023/2/7 3.2 Connect to the Internet ⚫ Method 1：Internet connection using SIM card dial-up (to be changed) ◼ Step 2：Insert the SIM card into the card slot (Note: When inserting or removing the SIM card operation, the power must be unplugged to avoid data loss or device damage). Insert the SIM card and connect the 5G antenna to the ANTX port and power on the IG974.
  • Page 16 IG974-Quick-Start-Manual-EN.md 2023/2/7 ◼ Step 2: Go to "Network>>Network Interface>>Cellular" page of IG974, check "Enable Cellular Network" and click Submit. 16 /...
  • Page 17 IG974-Quick-Start-Manual-EN.md 2023/2/7 When the network connection status shows "Connected" and the corresponding IP address is assigned, the IG974 is connected to the network via SIM card. ⚫ Method 2: Connect to the Internet via Ethernet ◼ Step 1: Connect the WAN and LAN ports of the IG974 using an Ethernet cable, as follows. 17 /...
  • Page 18 IG974-Quick-Start-Manual-EN.md 2023/2/7 ◼ Step 2: Enter the "Network>>Network Interface>>WAN" page, configure the IP address of WAN port (if the network type is static IP address, you need to configure the IP, subnet mask and other information according to the site network condition) and click Submit. 18 /...
  • Page 19 IG974-Quick-Start-Manual-EN.md 2023/2/7 ◼ Step 3: Go to the "System >>Network Tools" page of the IG974 and use the Ping command to check whether the IG974 is successfully connected to the Internet. 19 /...

  • Page 20: Software Version Upgrade

    IG974-Quick-Start-Manual-EN.md 2023/2/7 4. Software Version Upgrade For the latest software version of the IG974 product and information on its functional features, please visit the Resource Center. To update the software version of IG974, please refer to the following method. 4.1 IG974 Firmware Version Upgrade Click "System >>Firmware Upgrade", select the appropriate firmware file and click "Start Upgrade"...
  • Page 21 IG974-Quick-Start-Manual-EN.md 2023/2/7 4.2 IG974 Python SDK Version Upgrade Enter the "Edge Computing>>Python Edge Computing" page, click "Upgrade" and select the corresponding Python SDK file; click "Confirm" when the upgrade confirmation window pops up. ", IG974 will automatically complete the upgrade operation. 21 /...
  • Page 22 IG974-Quick-Start-Manual-EN.md 2023/2/7 4.3 IG974 Docker SDK Version Upgrade Go to the "Edge Computing>>Docker Management" page, click Upgrade and select the corresponding Docker SDK file. 22 /...
  • Page 23 IG974-Quick-Start-Manual-EN.md 2023/2/7 After successful installation, check the box "Enable Portainer Manager" and click "Submit". After enabling Portainer, you can access the administration page by clicking "Go to Portainer 23 /...
  • Page 24 IG974-Quick-Start-Manual-EN.md 2023/2/7 management page". Enter the account password set in the image above to log in to the administration page. After successful login, select "Local" and click "Connect". 24 /...
  • Page 25 IG974-Quick-Start-Manual-EN.md 2023/2/7 5. Python Edge Computing 5.1 Install and operate Python App To install and run the Python App (App) in IG974, please refer to the following procedure. ⚫ Step 1: Install the App Before installing the App, you need to ensure that the Python SDK is installed and the Python Edge Computing Engine is enabled, as shown in the following figure.
  • Page 26 IG974-Quick-Start-Manual-EN.md 2023/2/7 You can view the imported app after successful import, as shown in the following figure. ⚫ Step 2: Operate App Check the box to enable the app and click Submit. 26 /...
  • Page 27 IG974-Quick-Start-Manual-EN.md 2023/2/7 When enabled, the app will run in IG974 and automatically after every power on. 5.2 Python App Running Configuration Upgrade If the installed app supports importing configuration files to modify the operation mode, you can refer to the following procedure to update the running configuration of the app. ⚫...
  • Page 28 IG974-Quick-Start-Manual-EN.md 2023/2/7 ⚫ Step 2: Restart the App after successful import, and the App will run according to the imported configuration file after the restart is completed. 5.3 Python App Version Upgrade To update the Python App version, please import the new version of the App from the "Edge Computing >> Python Edge Computing"...
  • Page 29 IG974-Quick-Start-Manual-EN.md 2023/2/7 29 /...
  • Page 30 To run and debug Python code on IG974, you need to enable the developer mode of IG974. In "System>>Access Tools" page, check "Enable Developer Mode", and then you can develop on IG974 via VS Code. How to use VS Code to develop IG974 in Python, please refer to this link: http://sdk.ig.inhand.com.cn/zh_CN/latest/MobiusPi-Python-QuickStart-CN.html. (MobiusPi Python Development Quick Start)
  • Page 31 IG974-Quick-Start-Manual-EN.md 2023/2/7 31 /...
  • Page 32 6. Remote Monitoring Platform The Device Cloud Platform developed by InHand supports monitoring the status of IG974, remote maintenance of devices, remote batch distribution of IG974 configurations and IG974 batch upgrades to help users manage IG974 and field devices conveniently and efficiently.
  • Page 33 IG974-Quick-Start-Manual-EN.md 2023/2/7 The status of IG974 is described as “Connected” after successful connection to the device cloud platform. 33 /...

  • Page 34: Restore Factory Settings

    IG974-Quick-Start-Manual-EN.md 2023/2/7 7. Appendix 7.1 Restore Factory Settings There are two ways to restore the factory settings of IG974: hardware restore factory settings and software restore factory settings. ⚫ Hardware restore factory settings ◼ Step 1: Press and hold the RESET key within 10 minutes after the device is powered on. ◼...
  • Page 35 IG974-Quick-Start-Manual-EN.md 2023/2/7 35 /...
  • Page 36 IG974-Quick-Start-Manual-EN.md 2023/2/7 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 37 IG974-Quick-Start-Manual-EN.md 2023/2/7 IC STATEMENT This device complies with Industry Canada license-exempt RSS standard(s): Operation is subject to the following Two conditions: (1) this device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This manual is also suitable for:

Ig974

Table of Contents