InHand VG710 Quick Start Manual
Onboard gateway
Hide thumbs
Also See for VG710:
- User manual (82 pages) ,
- Quick manual (4 pages) ,
- Quick start manual (7 pages)
Table of Contents
Advertisement
Quick Links
Version: V1.0
Date: December 12
VG710 Onboard Gateway
Quick Start Guide
1. Packing List
Standard packing list:
1 main unit
1 power cable
1 network cable
4 mounting bolts
Optional accessories:
2 LTE antennas
2 Wi-Fi antennas (2 types)
1 GNNS antenna
1 Bluetooth antenna
1 OBD-to-20 pin connection cable
1 20-pin extension cable (for custom projects)
(for engineering projects)
Advertisement
Table of Contents
Related Manuals for InHand VG710
Summary of Contents for InHand VG710
- Page 1 Version: V1.0 Date: December 12 VG710 Onboard Gateway Quick Start Guide 1. Packing List Standard packing list: 1 main unit 1 power cable 1 network cable 4 mounting bolts Optional accessories: 2 LTE antennas 2 Wi-Fi antennas (2 types) 1 GNNS antenna...
- Page 2 VG710 Onboard Gateway Quick Start Guide 2 / 6 2. Adapted Vehicle Models Dongfeng Tianlong BAIC Motor Auman Iveco (NJ1045EFCS) Dongfeng Tianjin (BJ4259SNHKB-AA) Iveco (NJ6605DC) Sinotruck HAOWO Iveco (NJ6725DC) Yutong Heavy Industries BAIC Motor Foton Iveco (NJ6605DC) 3. Appearance Indicator...
- Page 3 The installation procedures for the other antennas are the same. (3) Pins of the RS232 serial port Currently, InHand Networks does not define the application scenarios of the RS232 serial port. You can connect to this port as needed. DB-9 interface definition...
- Page 4 VG710 Onboard Gateway Quick Start Guide 4 / 6 Female J1939 connector OBD-II adapter cable I/O connector Receptacle OBD-II connector (5) Connecting to the power supply In a normal engineering environment, connect to the power supply V+, GND, and ignition sense cable. Connect the ignition sense signal cable to the ignition sense cable, as shown in Figure 1.
- Page 5 (6) Connecting the network cable Connect the network cable between the device and terminal. (7) USB interface Currently, InHand Networks does not define the application scenarios of the USB interface. 5. Status Confirmation (1) Logging into the device web interface Step 1: Connect to the device through the network cable or Wi-Fi (see the SSID and key on the nameplate).
- Page 6 VG710 Onboard Gateway Quick Start Guide 6 / 6 Dial-up: After the dial-up function is enabled on the Network > Cellular page, Connected and the allocated IP address are displayed in the status bar. In this case, the device is successfully connected to the Internet, and the Cellular indicator is steady on in green, as shown in Figure 1.
Need help?
Do you have a question about the VG710 and is the answer not in the manual?
Questions and answers