Operation - Philips 420P30 User Manual

Computer Display modes
VGA 640x480
Wide VGA 848x480
Wide VGA 852x480
MAC 640x480
MAC 832x624
MAC 1024x768
MAC 1152x870
SVGA 800x600
XGA 1024x768
SXGA 1280x1024

Operation

&
Insert the mains plug supplied into the
mains inlet at the back of the monitor and in
the wall socket. Please, only use the supplied
rim-earthed mains cord which has to be
inserted in a grounded socket.
é
Remote control: remove the cover of the
battery compartment.
Insert the 2 batteries supplied (Type LR6/AA-
1.5V).
The batteries supplied do not contain the heavy
metals mercury and cadmium. Nevertheless in
many countries batteries may not be disposed of
with your household waste. Please check on how to
dispose of batteries according to local regulations.
"
Make sure that your receiver box and/or PC
are switched on and that your PC is in the
correct display mode.
2 2
60, 72, 75, 85 Hz
60 Hz
60 Hz
66.67 Hz
74.55 Hz
74.93 Hz
75 Hz
56, 60, 72, 75, 85 Hz
60, 70, 75, 85 Hz
60,
72 Hz (not with
DVI-D-source)
R6 / AA
When a VGA computer is connected, the
display selection is made automatically.
A message is displayed when the monitor does
not support the connected VGA mode.
Switch your computer to a correct display
mode.
'
Switch the monitor on : Press the power
button B at the right side of the monitor.
A green indicator lights up and the screen
comes on.
B
When the monitor does not receive a
supported VGA signal and is not connected to
a receiver box the screen switches to standby
and the red indicator lights up.
When you switch on your monitor for the first
time, and the monitor is not connected to a
receiver box, the menu language automatically
appears on the screen.The explanation appears
in different languages one at a time.
Follow the instructions on screen to select the
correct language or see Setup menu, Language,
p. 6.