Dell P103G002 Service Manual page 41

Table 5. System setup options—System Configuration menu (continued)
System Configuration
Port Enablement
SATA Operation
Drive Information
Enable Audio
Enable Microphone
Enable Internal Speaker
USB Configuration
Enable Boot Support
Enable External USB Ports
Enable Thunderbolt Technology Support
Enable Thunderbolt Boot Support
Miscellaneous Devices
Enable Camera
Touchscreen
Enable Fingerprint Reader Device
Enable Fingerprint Reader Single Sign On
Enable MediaCard
Keyboard Illumination
Enables the selected onboard drives.
Configures operating mode of the integrated SATA hard drive controller.
Default: RAID. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Displays the information of various onboard drives.
Enables or disables all integrated audio controller.
Default: ON.
Enables or disables microphone.
Default: ON.
Enables or disables internal speaker.
Default: ON.
Enables or disables booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
Default: ON.
Enables or disables USB ports to be functional in an operating system
environment.
Default: ON.
Enables or disables Thunderbolt Technology Support.
Default: ON.
Enables or disables Thunderbolt Boot Support.
Default: OFF.
Enables or disables various onboard devices.
Enables or disables the camera.
Default: ON.
Enables or disables the touchscreen for the operating system.
NOTE: Touchscreen will always work in the BIOS setup irrespective of this
setting.
Default: ON.
Enables or disables the Fingerprint Reader Device.
Default: ON.
Enables or disables the Fingerprint Reader Device's Single Sign On capability.
Default: ON.
Enables to switch all media cards On/Off or set the media card to read-only
state.
Default: Enable Secure Digital (SD) Card.
Configures the operating mode of the keyboard illumination feature.
Default: Bright. Enable the keyboard illumination feature at 100% brightness
level.
System setup 41