Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1
Press MENU.
2
repeatedly until [CT] is
Press
or
displayed.
3
Rotate
to select a setting:
• [CT ON]: turn on the RDS clock. Time
shown on the unit synchronizes with
that on the RDS station.
• [CT OFF]: turn off the RDS clock.
Tip
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
5 Play audio files
Note
•
Ensure that the disc or device contains playable files.
Play a disc
Note
•
You cannot play CDs encoded with copyright
protection technologies.
You can play commercially available audio CDs
and these discs:
•
CD-Recordables (CD-R)
•
CD-Re-writables (CD-RW)
•
MP3 CDs
•
WMA CDs
Note
•
Ensure that the disc contains playable content.
Insert a CD with the printed side facing up.
» Play starts automatically.
•
To pause CD play, press
•
To resume CD play, press
•
To skip to the previous/next track, press
or
.
•
To search backward/forward rapidly within
the current track, press
seconds.
Remove the CD
To take out the CD, press on the front panel.
Tip
•
If the disc is blocked in the disc compartment, press and
hold
until the disc comes out.
.
again.
or
for three
EN
13