Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
For Best results,
use 3.0 amp Hour Battery
or Greater.
(Sold Separately)
1/4" HEX COMPACT
IMPACT DRIVER
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
1981c-b
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
23d
56724
Advertisement
Related Manuals for Bauer 1981C-B
Summary of Contents for Bauer 1981C-B
- Page 1 Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 1981c-b For Best results, use 3.0 amp Hour Battery or Greater.
-
Page 2: Table Of Contents
table of contents Safety ............2 Operation ............ 8 Specifications ..........7 Maintenance ..........10 Setup ............7 Warranty ............ 12 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Safety
2. electrical safety d. remove any adjusting key or wrench before turning the power tool on. A wrench a. power tool plugs must match the outlet. or a key left attached to a rotating part of the never modify the plug in any way. Do not use power tool may result in personal injury. - Page 4 4. power tool use and care 6. Battery tool use and care a. Do not force the power tool. use the correct a. prevent unintentional starting. Ensure the power tool for your application. The correct switch is in the off-position before connecting power tool will do the job better and safer to battery pack, picking up or carrying the at the rate for which it was designed.
- Page 5 The battery Charger gets hot during 8. Vibration Safety use. The Charger’s heat can build This tool vibrates during use. up to unsafe levels and create a fire Repeated or long‑term exposure to vibration may hazard if it does not receive cause temporary or permanent physical injury, adequate ventilation, due to an electrical fault, or particularly to the hands, arms and shoulders.
- Page 6 Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged.
-
Page 7: Specifications
Specifications Bauer 20V Li‑ion 57007 Battery Type (sold separately) Bauer 20V Li‑ion 57006 Charger Type (sold separately) No Load Speed : 0‑2900/min Chuck Size 1/4″ Hex Setup - Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. -
Page 8: Operation
Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove its Battery pack before performing any procedure in this section. - Page 9 Workpiece and Work area Set up 1. Designate a work area that is clean and well lit. 2. Secure loose workpieces using a vise or clamps The work area must not allow access by children (not included) to prevent movement while working. or pets to prevent distraction and injury.
-
Page 10: Maintenance
Maintenance and Servicing instructions procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove its Battery pack before performing any procedure in this section. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment. - Page 11 troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Battery Pack not properly 1. Remove Battery Pack, make sure there are no connected. obstructions, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.