Advertisement
Operating instructions
read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:
Make sure that the trigger is in the off-position and remove its Battery
pack before performing any procedure in this section.
tool Set up
Battery charging
Charge battery after unpacking and before using this tool. Follow instructions included with battery charger.
Bit installation
cautiOn! Only use 1/4" hex shank bits
(sold separately) designed for impact use. Verify
bit fits the Chuck precisely before use.
1. Pull Collar forward and insert an appropriate
impact‑rated accessory into the hex drive Chuck.
Pull on bit to ensure it is secure.
2. To remove, pull Collar forward, remove bit
from Chuck and then release Collar.
attaching Belt clip
Attach Belt Clip to Handle using supplied Screw.
Clip may be attached to either side.
Belt clip
Page 8
Screw
For technical questions, please call 1-888-866-5797.
collar
Item 56724
Advertisement
