Bauer 2495C-B Owner's Manual & Safety Instructions

20v lithium-ion 3/8" right angle impact wrench

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
20v LITHIUM-ION
3/8" RIGHT ANGLE
IMPACT WRENCH
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2024 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
2495C-B
tM
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
24f
71112

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2495C-B and is the answer not in the manual?

Questions and answers

Summary of Contents for Bauer 2495C-B

  • Page 1 Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 2495C-B 20v LITHIUM-ION 3/8" RIGHT ANGLE IMPACT WRENCH Visit our website at: http://www.harborfreight.com...
  • Page 2: Important Safety Information

    table of contents Safety ............2 Operation ............ 9 Specifications ..........6 Maintenance ..........10 Setup ............7 Warranty ............ 12 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3 c. Hold the power tool by insulated gripping j. Do not lay the tool down until it has come to surfaces, when performing an operation a complete stop. Moving parts can grab the where the fastener may contact hidden surface and pull the tool out of your control. wiring or its own cord.
  • Page 4 g. use the power tool, accessories and tool bits f. under abusive conditions, liquid may be etc. in accordance with these instructions, ejected from the battery; avoid contact. taking into account the working conditions If contact accidentally occurs, flush with and the work to be performed.
  • Page 5: Extension Cords

    7. Lithium Battery Safety Warnings 8. Vibration Safety This tool vibrates during use. Repeated or long‑term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration‑related injury: a.
  • Page 6 Read the manual before set‑up and/or use. Specifications Battery Type Bauer 20V Li‑Ion Charger Type Bauer 20V Li‑Ion No Load Speed : 0‑1600/min / 0‑2250/min BPM (Blows Per Minute) 0‑2250 / 0‑3000 Max Torque 65 ft‑lb...
  • Page 7: Tool Set Up

    Setup - Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions anvil Direction Switch trigger Handle Speed Switch Belt clip tool Set up tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: turn the switch to its off position and remove Battery pack...
  • Page 8 attaching Belt clip Attach Belt Clip to either side of the tool using supplied Screw. Screw Belt clip rotating angle Head 1. Loosen the Screw. 2. Remove Angle Head from Tool body. Screw 3. Rotate Angle Head 180°. Attach Angle Head to Tool body using Screw.
  • Page 9: Workpiece And Work Area Set Up

    Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove its Battery pack before performing any procedure in this section.
  • Page 10: Cleaning, Maintenance, And Lubrication

    Maintenance and Servicing instructions procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove its Battery pack before performing any procedure in this section. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment.
  • Page 11: Troubleshooting

    troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Battery Pack not properly 1. Remove Battery Pack, make sure there are no connected. obstructions, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.
  • Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

Table of Contents