Table of Contents
Advertisement
Control
Hotplate control
Position
Power kW
170–270
3 kW
Timer
You can use the timer to set the cooking time up to
60 minutes.
Position
- 60
Gas hob selector
The gas hotplate selector is used to set the heat set-
ting for the hotplates.
Position
There is a limit stop at the end of the settings range.
Do not turn the gas hotplate selector beyond the end
stop.
Lamp button
Ignition button
Button for switching on the electronic ignition system
Ignition knob
Explanation
You can use the four hot-
plate switches to control
the output provided by
each individual hotplate.
The symbol above each
of the switches shows
you which hotplate is set
using that switch.
→ "Gas hob selector",
Page 11
Function
Zero setting
Temperature setting
range
Function
Zero setting
End of the programmed cooking
time
Time period
Function
Zero setting
Settings range
Use
Switch on the oven light.
Use
Ignite the hotplate burners.
Ignite the lower oven gas burner.
Familiarising yourself with your appliance en
Control
Ignition button
Lamp button
Function selector
Turn the function selector for the oven temperature anti-
clockwise.
Explanation
The oven is switched off.
Heat generated by the lower oven gas burner in ºC for
preparing cakes in tins, pizza on a baking tray, baked
goods, etc.
Note: The timer has no effect on how the oven works. It
can only be used as a kitchen timer.
Explanation
Off
A signal sounds at the end of the set cooking time.
Time scale in minutes
Explanation
The hotplate is switched off.
Large flame = highest setting
Small flame = lowest setting
Lamp key
To illuminate the cooking compartment, press the lamp
button.
Activating and deactivating
Press the button to switch on.
Press the button to switch the machine off.
Explanation
If you press the button, all igniters create sparks at the
same time.
Explanation
To switch on the elec-
tronic ignition system.
→ "Ignition button",
Page 11
Press the button to switch
on the oven light.
→ "Lamp key", Page 11
11
Advertisement
Table of Contents
