Ariens Sno-Thro Platinum Series Service Manual page 17

4. Reinstall three carriage bolts through height adjuster
bracket and reinstall spacers onto bolts. See
Figure 24.
See Figure 25.
5. Secure height-adjuster plate to carriage bolts with
three original flange nuts.
6. Reinstall cable eyelet onto lock finger and secure with
hairpin.
7. Reposition cable adjustment barrel into height
adjuster bracket and adjust cable. Refer to operator's
manual for instructions.
8. Check adjustments after first use.
Figure 23
All Models
9. Return unit to operating position.
EN – 15
Figure 24