Transportation And Storage; Technical Data - Husqvarna 550XPG Mark II TrioBrake Operator's Manual

Transportation and storage

• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel and chain oil tanks before
transportation or before long-term storage. Discard
the fuel and chain oil at an applicable disposal
location.
• Use the transportation guard on the product to
prevent injuries or damage to the product. A saw
chain that does not move can also cause serious
injuries.
• Remove the spark plug cap from the spark plug and
engage the chain brake.
• Attach the product safely during transportation.

Technical data

Husqvarna
545 Mark II
Engine
Cylinder dis- 50.1
placement,
3
cm
Idle speed, 2800
rpm
Maximum en- 2.7/3.6 @
gine power 9900
acc. to ISO
7293, kW/hp
@ rpm
1
Ignition system
Spark plug NGK CMR6H
Electrode gap, 0.5
mm
Fuel and lubrication system
Fuel tank ca- 0.53/530
pacity,
3
liter/cm
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
544 - 009 - 07.02.2022
Transportation and storage
Technical data
Husqvarna Husqvarna
545G Mark II 550XP Mark II
50.1 50.1
2800 2800
2.7/3.6 @ 3.0/4.0 @
9900 10200
NGK CMR6H NGK CMR6H
0.5 0.5
0.53/530 0.53/530
To prepare your product for long-term
storage
1. Stop the product and let it become cool before you
disassemble it.
2. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION:
guide bar are not cleaned, they can
become rigid or blocked.
3. Attach the transportation guard.
4. Clean the product. Refer to
on page 21 for instructions.
5. Do a complete servicing of the product.
Husqvarna
550XPG Mark
II
50.1
2800
3.0/4.0 @
10200
NGK CMR6H
0.5
0.53/530
If the saw chain and
Maintenance schedule
Husqvarna Husqvarna
550XP Mark II 550XPG Mark
TrioBrake II TrioBrake
50.1 50.1
2800 2800
3.0/4.0 @ 3.0/4.0 @
10200 10200
NGK CMR6H NGK CMR6H
0.5 0.5
0.53/530 0.53/530
33