WHAT'S IN THE BOX Grass Trimmer Battery pack Charger Protection guard Auxiliary handle If you do not have all these items, please contact: www.coreservice.co.uk Hotline: +44 01904 947568 Email support@coreservice.co.uk www.coreservice.co.uk Hotline: +44 01904 947568 Email support@coreservice.co.uk...
TOOLS REQUIRED SPECIFICATION Technical Data Model ST1904-2 Nominal voltage of product with battery 18V d.c./2.0Ah Li-ion No-load cutting speed 8000 /min Cutting width 26cm Line diameter 1.6mm Line length Net weight approx. 2.2 kg Measured sound pressure level 81.3 dB(A), K=3.0 dB(A) Guaranteed sound power level 96 dB(A) Vibrations...
Page 5
The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are necessary. The declared vibration value has been measured in accordance with a standard test method (according to EN 786) and may be used for comparing one product with another. The declared vibration value may also be used in a preliminary assessment of exposure.
EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS This symbol indicates that there is a danger of serious personal injury or death if you do not observe the warning. To reduce the risk of injury, user must read instruction manual carefully. Wear eye protection. Wear ear protection.
Page 7
Do not subject the battery to strong sunlight over long periods and do not leave it on a heater (max.45ºC). max. 45 Do not dispose of batteries in a fire. They will explode and cause injury. Li-Ion battery This product has been marked with a symbol relating to ‘separate collection’...
IMPORTANT SAFETY WARNINGS General Safety Instructions Warning: Please read the following instructions carefully, failure to do so could lead to serious personal injury. When using the electric grass trimmer, basic safety precautions, including the following, should always be followed to reduce the risk of fire,electric shock and personal injury.
Page 9
• Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with these instructions to use the machine, local regulations may restrict the age of the operator. • Never operate the machine while people, especially children, or pets are nearby.
Page 10
• Wear eye protection, long trousers and stout shoes at all times while operating the machine. • Avoid using the machine in bad weather conditions especially when there is a risk of lightning. • Never operate the machine with damaged guards or shields or without guards or shields in place.
Page 11
• If the product starts to vibrate abnormally: ∂ Inspect for any damages. ∂ Replace or repair any damaged parts. ∂ Check for and tighten any loose parts. Safety Warning For Battery Pack • Fully charge battery pack before the first use. •...
Page 12
• Do not subject battery pack to mechanical shock. • In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Page 13
• Do not mix cells of different manufacture, capacity, size or type within a device. • Do not remove battery pack from its original packaging until required for use. Safety Warning For Battery Charger • Charge only battery pack of the same model provided by manufacturer and of models recommended by manufacturer.
Page 14
• Protect the battery charger from rain and moisture. If water accesses the battery charger there is an increased risk of electric shock. • Battery will heat up whilst charging. When charging batteries, ensure that the battery charger is in a well-ventilated area and to reduce the risk of fire, do not operate battery charger on or close to inflammable materials such as paper or textiles.
Page 15
• Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer. • When not in use, store the machine out of the reach of children. • Replace worn or damaged parts for safety. Use only genuine replacement parts and accessories.
Page 16
3. Use correct cutting device for the product and ensure they in good condition. 4. Keep tight grip on the handles/gripping surface. 5. Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate). 6. Plan your work schedule to spread any high vibration tool use across a longer period of time.
Page 17
Warning: This product produces an electromagnetic field during operation! This field may under some circumstances interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their doctor and the medical implant manufacturer before operating this product! www.coreservice.co.uk Hotline: +44 01904 947568...
PRODUCT DESCRIPTION AND IDENTIFICATIONS 1. Lock off button 11. Motor casing 2. Upper handle 12. Edging wheel 3. On/Off Switch 13. Cutting head connector 4. Battery 14. Protection guard 5. Locking knob for the auxiliary handle 15. Locking button for the cutting head 6.
ASSEMBLY AND OPERATING INSTRUCTIONS NOTE: To reduce the risk of injury, user must read instruction manual. WARNING: Before assembly and adjustment to the grass trimmer, ensure the grass trimmer is turned off and the battery pack is removed. Intended Use The machine is intended for the cutting of grass and weeds under bushes, as well as on slopes and edges that cannot be reached with the lawn mower.
Page 20
1) Remove two screws from the motor housing. 2) Slide the protection guard (14) over the motor housing. 3) Re-insert the two screws into the protection guard (14) and tighten the screws. Mounting the auxiliary handle 1: align the auxiliary handle (6) with the mounting clamp (7) ensuring the holes are aligned. 2: fully push the bolt through the holes until the thread can be seen.
Page 21
Install or remove battery WARNING! Always release the ON/OFF switch before inserting or removing the battery. 1) Installing the battery: Align the ribs on both side of the battery with the slots in the housing. Slide the battery into place until an audible click is heard.
Page 22
Operation Setting the cutting head angle The angle of trimmer head can be set to 4 different working positions. Push the locking button for the cutting head (15) and tilt the cutting head to the required position. Release the locking button and it will lock the cutting head automatically.
Page 23
Converting the line trimmer for edging 1) Pull back the locking (8). 2) Rotate the upper handle (2) 90°. 3) Release the locking collar (8), it will return automatically and lock the upper handle (2). 4) The cutting head is now turned 90° for edging. Setting the position and angle of the auxiliary handle 1) Loosen the locking knob (5).
Page 24
Extending the cutting line 1) Before starting the line trimmer for the first time, check the length of the nylon cutting line. Make sure that it touches or passes over the line blade (18). Extend the cutting line if it is not long enough as follows: a.
Page 25
8) If the grass is very long, take small cuts each time and this will keep the line trimmer running at high speed and improve cutting efficiency. Edging 1) Convert the line trimmer for edging. Make sure that the cutting head and shaft are locked. 2) Rotate the edge guide (16) forward and down into position before edging.
Page 26
FIG N FIG Q Replacing the spool WARNING! Before replacing the spool, always switch off the line trimmer and remove the battery. WARNING! RISK OF INJURY The spool will continue to rotate after the line trimmer is switched off. Do not try to stop the spool with your hands.
Page 27
2) Replace the spool either with a new replacement spool or a rewind spool. To rewind the spool: a. Use 1.6mm diameter cutting line only. b. Insert about 3mm of the line into the hole in the spool. c. Ensure the replacement line is evenly wound onto the spool and the line is not loose. Line must be wound in the direction of the arrow shown on the spool and the length should not exceed 6.5m.
Page 28
4) Insert the spring, put the spool with the spool carrier back by pushing the carrier down and turn it clockwise until it locks. Catch Lock FIG R FIG U Note: Take care not to lose the spring found inside the spool head. 5) Test if the line can release properly by pushing the spool button with your thumbs while pulling the line with your fingers.
Page 29
3 Green LED on Battery pack fully charged 2 Green LED on Battery pack 65% charged 1 Green LED on Battery pack 35% charged No LED lit Battery is dead and needs to be charged Charge the battery pack before operating when it is at medium or low battery charging level. Button Charging procedure 1) Slide the battery pack into the charger base ensuring the terminals are fully connected.
CARE AND CLEANING 1) After use, remove the battery pack from the line trimmer. 2) Remove all the grass and dirt around the cutting head. 3) Use only mild soap and a damp cloth to clean the line trimmer's housing. Do not allow any liquid to get inside it.
TROUBLE SHOOTING Use this section to help you to try and solve any problems you may have: PROBLEMS POSSIBLE CAUSES REMEDIES Battery discharged Recharge battery. Battery too hot/cold. Allow it to cool/warm. Trimmer fails to operate. Motor is broken. Contact Service Agent. Internal wiring of machine Contact Service Agent.
Page 32
Plug of battery charger not plugged Insert mains plug (fully) into the in (properly). socket outlet. Battery charge indicator does not light Check the mains voltage; have the Socket outlet, mains cable or battery charger checked by an au- battery charger defective. thorized after-sales service agent.
DECLARATION OF CONFORMITY / PERFORMANCE Product Code: 95074 (ST1904-2) Product Description: Hawksmoor 18V 26cm Cordless Grass Trimmer 1. Toolstation Limited, Express Park, Bristol Road, Bridgwater, Somerset TA6 4RN This declaration of conformity is issued under the sole responsibility of Toolstation 2.
ENVIRONMENTAL INFORMATION The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
GUARANTEE Toolstation products deliver reliable service for normal, household use in domestic settings. All Toolstation products are individually tested before leaving the factory. If you are a consumer and you experience a problem with your Toolstation product, which is found to be defective due to faulty materials or workmanship within the Guarantee Period, this Toolstation Guarantee will cover repair or - at the discretion of Toolstation –...
Need help?
Do you have a question about the 95074 and is the answer not in the manual?
Questions and answers