Nanometrics Trillium Compact User Manual page 13

Table 1-1 - List of cables and accessories (Continued)
Name
Cable – Trillium
seismometer to open end
Cable – Trillium
seismometer to third-party
digital recorder
Cable – Serial
communications and power
cable, molded
Posthole models TC120-PH2, TC120-PH2-XC, TC20-PH2 and TC20-PH2-XC
Bubble Level
16889R10 • 2020-11-12
Part number Descriptions
16865–3M Double-shielded, ultra-flexible cable with
Trillium Compact right-angled connector on one
16865–5M
end and open-ended at the other end for
16865–10M
attaching the connector of a third-party digitizer.
16865–15M
In addition to connecting the analog inputs,
power, and control line signals to the digitizing
16865–25M
and data logging features of the digitizer, this
cable also provides access to the Web interface
of the seismometer through the Web interface
of the digitizer.
Standard cable lengths are 3 m, 5 m, 10 m, 15
m, and 25 m.
Custom cable lengths are available upon
request.
Contact Double-shielded, ultra-flexible cable with
Nanometrics Trillium Compact right-angled connector on one
end and a connector for a common third-party
digital recorder, such as a Q330 or REFTEK
D130, on the other end.
Contact Nanometrics (see
page 103
connectors to third-party digital recorders.
16978–2M A cable that provides serial communications and
power to the Trillium Compact. The cable has a
Trillium Compact connector on one end and
splits into two 2 m lengths. One end of the cable
split has a DB-9 serial connector that connects
to the serial port of a computer, and the other
end has a two-prong banana plug for power.
Standard cable length is 2 m.
Custom cable lengths are available upon
request.
MSC0225 For applications where precise leveling is
required, the bubble level is placed on top of the
Trillium Compact seismometer during
installation.
Chapter 1 - Getting Started
"Contact Us" on
for a full listing of cables with
Page 13