Williams AV DLR 400 ALK Quick Setup Manual

DLR 400 ALK Digital Receiver

2-Year Warranty

Williams AV products are engineered, designed and manufactured
under carefully controlled conditions to provide you with many years of
reliable service. Williams AV warrants the DLR 400 ALK receiver against
defects in materials and workmanship for two (2) years. During the first
two years from the purchase date, we will promptly repair or replace the
DLR 400 ALK receiver.
Earphones, headphones, cables, carry cases, and all other accessory
products carry a 90-day warranty.
WILLIAMS AV HAS NO CONTROL OVER THE CONDITIONS UNDER
WHICH THIS PRODUCT IS USED. WILLIAMS AV, THEREFORE, DISCLAIMS
ALL WARRANTIES NOT SET FORTH ABOVE, BOTH EXPRESS AND
IMPLIED, WITH RESPECT TO THE DLR 400 ALK RECEIVER, INCLUDING
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. WILLIAMS AV SHALL NOT
BE LIABLE TO ANY PERSON OR ENTITY FOR ANY MEDICAL EXPENSES
OR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED
BY ANY USE, DEFECT, FAILURE OR MALFUNCTION OF THE PRODUCT.
This device complies to "RSS-Gen Issue 2 June 2007" for Industry Canada
and FCC part 15.105(b) for the United States.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This device complies with ICES-003 class B. Test data is available from
the manufacturer on request.
This device complies with FCC part 15.105 (b)
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth
DLR 400 ALK Digital Receiver
for an uncontrolled environment. This equipment is a handheld device
and should be maintained with a minimum safety distance of 20 cm
from the antenna. This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
Note: FCC regulations, section 15.21, requires the user to comply with the
rules of transmitter operation. Any changes or modifications made by
the user not expressly approved for compliance may result in the loss of
all privileges and authority to operate the equipment.
Customer Service
If you experience difficulty with your system, call Toll-Free for Customer
Assistance:
1-800-843-3544 (U.S.A.) or
+1 952 943 2252 (Outside the U.S.A.)
If it is necessary to return the system for service, your Customer Service
Representative will give you a Return Authorization Number (RA) and
shipping instructions.

For Additional Information

This manual is a quick start guide for getting your Digi-Wave system
up-and-running. Most features and customization options are not
documented in this manual.
For additional information, feature instructions, commands, warranty
information and more, please download the full user manual from the
Digi-Wave 400 system's product page on Williams AV's website.
Note: DLR 400 ALK units are not compatible with Advanced
Interpretation Module (AIM) features.
DLR 400 ALK
Digi-Wave™ Digital, Alkaline Battery
Receiver
QUICK SETUP GUIDE
MAN 267C