HP Compaq 6005 Pro Product End-Of-Life Disassembly Instructions page 3

1. Remove the access panel
2. Remove the front bezel
3. Remove Fan duct and heatsink
4. Remove CPU
5. Remove Memory Module
6. DIsconnect all internal cable from PCA (see figure 16)
7. Remove ODD and rotate ODD cage
st
8. Remove 1 HDD
9. Remove PCA
10. Remove Battery
11. Release PSU case
12. Remove PSU PCA and Fan
13. Remove electrical capacitors from PCA (see figure33)
14.
15.
16.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
(see figure 1-2)
(see figure 3-4)
(see firgure 5-11)
(see figure 12-13)
(see figure 14-15)
(see figure 17-18)
(see figure 19-20
(see figure 22-23)
(see figure 24-25)
(see figure26-28)
(see figure29-32)
PSG instructions for this template are available at EL-MF877-01
Page 3