Table of Contents
Advertisement
en Basic operation
7.2 Cleaning the appliance before using it
for the first time
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
Remove the product information and the accessor-
1.
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
any adhesive tape either in or on the appliance.
Wipe the smooth surfaces in the cooking compart-
2.
ment with a soft, damp cloth.
Press
to switch the appliance on.
3.
Apply the following settings:
4.
8 Basic operation
8.1 Switching on the appliance
Press
to switch the appliance on.
▶
The
button lights up blue.
‒
a The Siemens logo appears in the display. A type of
heating and a temperature are then displayed.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
Press
to switch the appliance off.
▶
The light above the
‒
a The appliance switches off. Any functions currently
in progress are cancelled.
a The time or residual heat indicator appears in the
display.
8.3 Starting operation
You must start each cooking operation.
Press
to start the operation.
▶
a The settings, the run time and the heat-up line ap-
pear on the display.
8.4 Pausing or cancelling operation
You can briefly pause the operation and then continue.
If you cancel the operation completely, the settings are
reset.
To pause the operation briefly:
1.
Briefly press
‒
To continue the operation, press
‒
To cancel the operation, press
2.
a The operation stops and all of the settings are reset.
8.5 Setting an operating mode
Requirement: The appliance must be switched on.
Press
.
1.
The operating modes menu opens.
Use the rotary selector to select the required operat-
2.
ing mode.
10
button goes out.
.
.
.
Type of heating
Temperature
Cooking time
→ "Basic operation", Page 10
5.
Press
to start the operation.
Ventilate the kitchen while the appliance is heat-
‒
ing.
6.
When the cooking time has elapsed, press
switch the appliance off.
Once the appliance has cooled down, clean the
7.
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.
Clean the accessories thoroughly using a detergent
8.
solution and a dish cloth or soft brush.
Various options are available depending on the op-
erating mode.
Press
to select the required operating mode.
3.
The selection can be changed using the rotary se-
4.
lector.
Change any further settings depending on the selec-
tion.
Press
to start.
5.
8.6 Setting the type of heating and the
temperature
When you switch on the appliance, the types of heating
operating mode is set automatically.
Turn the rotary selector to select the required type
1.
of heating.
Press the button to switch to the temperature.
2.
Use the rotary selector to set the temperature.
3.
Press
to start the operation.
4.
a The appliance starts heating.
a The set type of heating, temperature and cooking
time/appliance run time are shown in the display.
When the food is ready, press
5.
appliance off.
Tip: The most suitable type of heating for your food
can be found in the type of heating description.
Note: You can also set a cooking time and an opera-
tion end time on the appliance.
→ "Time-setting options", Page 11
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
1.
Press
to pause operation.
Press .
2.
Use the rotary selector to change the type of heat-
3.
ing.
Changing the temperature
Once the operation has started, you can change the
temperature directly.
Use the rotary selector to change the temperature.
▶
a The temperature is applied immediately.
4D hot air
Maximum
1 hour
to
to switch the
Advertisement
Table of Contents
