Half Load Function; How To Cancel The Washing Programme - Blomberg GSN9123 User Manual

Operating the product
C
Programme and auxiliary
functions cannot be
set/changed after the
programme has started.
C
Your machine performs
water softening depending
on the hardness level
of the supply water. The
total time can also change
while the programme is
running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the
dishes.
A
Pay attention not to open the
door of the machine when
it is running. If you need to
open the door, safety system
will stop your machine.
There may be a rush of
vapour when you open the
door of your machine; be
careful. Washing programme
will resume running when
you close the door.

Half Load function

It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine
using top and bottom baskets
2. Turn the machine on.
3. After selecting the desired
programme, press the Half Load
key. Half Load indicator lights up.
4. Close your machine's door and
press Start / Stop key.
/38 EN
26
C
With the Half Load function
you can save both water and
power while using the lower
and upper baskets of the
machine.
C
Half Load function may
cause changes in the
programme duration.
How to cancel the washing
Programme
To cancel a programme while the
machine is operating:
Press start/stop key for 3 seconds.
The machine will drain the water inside
the machine for 45 seconds. The
programme is cancelled when washing
light goes off. Then, you can choose
and start a new programme.
C
There might be residues of
detergent or rinse aid left
in the machine and / or on
the pieces being washed
depending on the step
the programme you have
cancelled was in.
Dishwasher / User manual