Installation
Initial use
Before starting to use the product,
make sure that all preparations
are made in accordance with the
instructions in sections "Important
safety instructions" and "Installation".
•
Before using the product, fill the
salt reservoir with 1 litre of water,
add salt (see next page) and stir
to dissolve. Run the Dishwasher
without dishes on a short
programme with a small amount of
detergent.
A
There might be a small
amount of water left in the
product after factory quality
control tests. This causes no
harm to the product.
/38 EN
12
Dishwasher / User manual