Maintenance
and remove the clip from the engine shut-
off switch. Turn off the battery cut-off
switch if your boat has one.
Do not use your hand to hold the propeller
when loosening or tightening the propeller
nut. Put a wood block between the anti-cavi-
tation plate and the propeller to prevent the
propeller from turning.
Checkpoints
Check each of the propeller blades for ero-
●
sion from cavitation or ventilation, or other
damage.
Check the propeller shaft for damage.
●
Check the splines for wear or damage.
●
Check for fish line tangled around the pro-
●
peller shaft.
Check the propeller shaft oil seal for dam-
●
age.
68
EMU30662
Removing propeller
EMU29197
Spline models
1.
Straighten the cotter pin and pull it out us-
ing a pair of pliers.
2.
Remove the propeller nut, washer, and
spacer (if equipped). WARNING! Do not
use your hand to hold the propeller
when loosening the propeller nut.
[EWM01890]
ZMU07969
1. Cotter pin
2. Propeller nut
3. Washer
4. Propeller
5. Thrust washer
1. Cotter pin
2. Propeller nut
ZMU07970
3. Washer
4. Spacer
5. Propeller
6. Thrust washer