Install Tv Setup - Philips 29PT8306 User Manual

INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
J SETUP SETUP
SETUP
J Digital sources Digital Sources
Decoder/Descrambler
Information line
Factory settings
Auto Surround
INSTALLATION
Decoder/Descrambler
J Programme
Programme
Decoder status
* 'Dolby' and the double-D symbol
of Dolby Laboratories.
Manufactured under license from Dolby Laboratories .

Install TV Setup

&
é
"
are trademarks
'
The Setup menu allows you to adjust initial settings, i.e. those which are not
related to the installation of the TV channels.
The Setup menu contains items that control the settings of the TV's functions,
features, services and peripherals you may have connected.
Use the cursor in the up/down, left/right directions to select the menu item.
Use the OK key to activate.
Use the key to return or switch menu off.
MENU
Digital sources
See Connect Peripheral Equipment, p. 20 to connect your digital equipment,
like a DVD, a digital satellite tuner or a similar digital device.
Define Decoder/Descrambler programme numbers
If a decoder or a descrambler is connected, see p. 19 you can define one or
more programme numbers as decoder programme numbers.
Press the cursor left/right to select the input used to connect to your
decoder , or
Off
EXT1 EXT2
Select if you do not want the selected programme number being
Off
activated as a decoder programme number.
Select when the decoder is connected to your EasyLink video recorder.
EXT2
When selecting the decoder, the message EasyLink: downloading presets....
appears on the screen.
Information line
Select and after the selection of a TV programme or after pressing the
On
i key on the remote control, a TV channel which broadcasts teletext may
transmit the name of the TV channel, the programme name or another
message.This is displayed on screen next to information about sound.
When selected , only sound information is displayed after the selection of
Off
a TV channel or after pressing the i key.
Factory settings
Select and press the OK key to restore picture and sound
Factory settings
settings, predefined in the factory.
Auto Surround
Sometimes the broadcaster transmits special signals for Surround Sound
encoded programmes. In that case, the TV automatically switches to the best
Surround Sound mode when Auto Surround is switched on. Virtual Dolby*
Surround will be reproduced, see p. 8.
Overruling this surround mode remains possible.
Installation
Select and press the OK key to return immediately to the
Installation
menu.
INSTALLATION
To exit from the menu press the
.
key repeatedly.
MENU
Installation
7