Stihl FS 131 R Instruction Manual page 17

Mounting the control handle
12
11
9
10
Take out the screw (9) – the nut (10)
N
remains in the control handle (11).
Push the control handle onto the
N
handlebar (7) until the holes (13)
line up – the throttle trigger (12)
must point towards the gearbox.
Insert the screw (9) and tighten it
N
down firmly.
Fitting the Throttle Cable
NOTICE
Do not kink the throttle cable or lay it in
tight radii – make sure the throttle trigger
moves freely.
FS 131, FS 131 R
13
7
13
Push the throttle cable (14) into the
N
retainers (15).
Adjusting the Throttle Cable
Check adjustment of throttle cable –
N
see chapter on "Adjusting the
Throttle Cable".
Swiveling the handlebar
Transport position
14
15
15
14
15
N
N
N
Working position
N
3
7
Loosen the wing screw (3) and
unscrew it until the handlebar (7)
can be rotated.
Rotate the handlebar 90°
counterclockwise and then swing
the handles down.
Tighten down the wing screw (3)
firmly.
Reverse the sequence described
above to swing the handles up and
turn the handlebar clockwise.
English
15