Huawei OptiXstar EN8245X6s-8N Quick Start Manual page 9

Huawei OptiXstar EN8245X6s-8N
Quick Start for QR code
Indicator
PON/LOS
LAN1-
LAN3/2.5G
LAN
TEL1-TEL2
USB
WLAN
WPS
Status
No.
1
2
3
4
Issue 02 (2022-12-14)
Status Description
See the following table.
Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted over the Ethernet port.
Off The Ethernet connection is not set up.
Steady on The ONT is registered with the softswitch but no
service flows are transmitted.
Blinks twice The ONT is registered with the softswitch, and
a second data is being transmitted on the port.
Blinks once The ONT fails to be registered with the softswitch.
every 2
seconds
Off The POTS port is disabled.
Steady on The USB port is connected and working in the
host mode, but no data is transmitted.
Blinking Data is being transmitted on the USB port.
Off The system is not powered on or the USB port is
not connected.
Steady on The WLAN function is enabled.
Blinking Data is being transmitted over the WLAN port.
Off The WLAN function is disabled.
Steady on The WPS function is enabled.
Blinking A Wi-Fi terminal is accessing the system.
Off The WPS function is disabled.
PON Status LOS Status
Off Off
Blinks twice Blinks twice
a second a second
Blinks twice Off
a second
Steady on Off
Copyright © Huawei Technologies Co., Ltd.
Description
The ONT is prohibited by the upper-layer
device or blinks abnormally. Contact the
service provider for help.
The ONT attempts to set up a connection
with its upper-layer device.
A connection is set up between the ONT
and its upper-layer device.
3 Indicator Description
6