Settings And Updates; Sound - Subaru Legacy 2024 Getting Started Manual

SETTINGS AND UPDATES

SOUND

To change the sound settings, press the "Home" button and select "Settings", then
"Sound". Choose the setting you want to change.
SETTING
Audio
Navigation Guidance
Volume
Notification Volume
Beep Sound Setting
Beep Sound Volume
Phone Ringtone Volume
Incoming Call Volume
98
In the audio settings, you may have the following setting
capabilities:
• Sound Customization — This function allows you to set
the Equalizer, Balance/Fader and Vocal Image Control.
• Equalizer — How good an audio program sounds is
largely determined by the mix of the treble, mid and
bass levels. In fact, different kinds of music and vocal
programs usually sound better with different mixes of
treble, mid and bass.
• Balance/Fader — A good balance of the left and right
stereo channels and of the front and rear sound levels
is also important.
Keep in mind that when listening to a stereo recording
or broadcast, changing the right/left balance will
increase the volume of 1 group of sounds while
decreasing the volume of another.
• Vocal Image Control — Extracts only vocal sound
from whole sound and adjusts volume balance off
vocals only.
• Sound Restorer — This function plays compressed audio
with quality near original sound by adding the complement
signal of high tone.
• Virtual Bass — This function corrects the bass sound by
adding harmonic sound.
• Dynamic Beat Enhancer — This function expands the
dynamic range lost in data compression and creates a
sharp beat sound.
• Speed Volume Control — The system adjusts to the
optimum volume and tone quality according to vehicle
speed to compensate for increased vehicle noise.
• AUX Volume Gain — Sets the AUX volume gain.
Sets the navigation prompt volume.
Sets the interrupt guidance volume.
Turns the tone sound on or off.
Sets the tone sound volume.
Sets the ringtone volume.
Sets the volume of the received call.
FUNCTION