DUROMAX DUALFUEL XP12000EH Service Manual page 13

MAINTENANCE AND CARE (CONTINUED)
Changing the Carburetor Main Jet (Continued)
9.
Determine main jet location
The carburetor jet is located inside the center metal tube of
the carburetor.
10.
Remove main jet
Remove the main jet with a flat head screwdriver. If necessary
gently tap the carburetor to allow the jet and emulsion tube to
fall out.
11.
Install new main jet
Place emulsion tube located above the jet back into the
carburetor tube in the same position, then install the new
main jet.
12.
Reassemble generator
Once the new jet is installed, reverse the above instructions
to reassemble carburetor and reinstall air filter assembly.
13