System Reboot; Event Log - Solectek Skyway 7000 Series User Manual

17. System Reboot

To reboot the system from the Web Interface:
Click on the Reboot menu option on the Navigation Toolbar. The following
•
screen will appear:
Click on the Reboot button to reset/reboot. The reboot process will take
approximately 25 seconds. Once the rebooting is done, you can use the Click
Here button below to access the user interface again.

18. Event Log

The Event Log displays all major events that may be noteworthy for the system
administrator for both monitoring and troubleshooting purposes.
The event log appears as follows:
There are three categories of events:
INFO: This is informational in monitoring the operation of the unit. The Info
line is part of the normal operation.
WARN: This may indicate something wrong with the unit or operation. For
example, downing of the RF port may be due to malfunction or the user
intervention (power off).
ERROR: This is indicative of abnormal operating conditions. For example, an
error line may be caused by the user typing in unacceptable values in the user
interface.
For easy viewing of specific information that you are looking for, each of the
category (info, warn, and error) can be turned off to give you a more compact
screen.
Verbose: This option adds further detail to each log event and is typically
useful only when working with Solectek technical support. Under normal
circumstances, it is recommended that the Verbose option be disabled.
20