Verifying Operation - Solectek Skyway 7000 Series User Manual

12. Verifying Operation

The basic status of the unit can be viewed in the Main Status screen. Shown
here is the Main Status screen in bridging mode:
This screen updates periodically and thus displays current field values.
Navigate to the Configuration screen if setting changes are necessary.
Three noteworthy items:
Up Time: This is the elapsed time that the unit has been running since the last
•
reboot or power cycle.
MAC Address: this is the MAC address of the unit.
•
RF Port Link State: The link state has two values.
•
Green – An RF link has been established
Red – an RF link is NOT established.
Each of the ports also has its own, detailed status screen. For the Ethernet Port
status, click on the details button located on the far right side. The screen
below is typical:
MTU Size: This is the maximum datagram size that the system is able to
transmit. Note that this refers to Ethernet payload not total Ethernet frame
size.
15