Iomega ZIP 250 Owner's Manual page 16

7
Connect the power supply.
the groove on the side of the Zip
WARNING
supplies may damage your Zip drive.
Universal Power Supply:
supply included with your Zip drive can be used worldwide. It
works at any voltage from 100 to 240 volts – all you need is the
appropriate plug adapter to connect to the outlets in the country
where you are using it. (Plug adapters are available at most
electronics shops worldwide.)
How to turn the Zip drive on:
Zip drive works as a disk eject button and a power button. With the
power supply connected, you can turn power on by pressing the
button, or you can insert a Zip disk and the drive will turn on
automatically. The green power light in the center of the button
shines when power to the drive is on.
Power / Eject Button
with Green Activity Light
(shines when power is ON;
flashes when drive is transferring data,
or when a disk is inserted or ejected)
When you want to power down your Zip drive, first eject any disk
from the drive, then push the button to power down the drive. See
page 23 for additional information on Zip power management.
16
Use only an Iomega Zip 250 power supply. Other power
The lightweight universal power
(The power cord fits in
®
drive.)
The button on the front of the