Declaration Of Conformity; Technical Support; Troubleshooting - i-Star 12302R User Manual

Pairing your speakers with Bluetooth
enabled mobiles and tablets
Once wiring is completed switch on the module and you
will hear a triple tone to indicate the module is ready to
pair. Select the Bluetooth function on your mobile/de-
vice and search for Bluetooth devices. The speaker will
appear as "iStar BTCSK" in the Bluetooth device list, se-
lect and pair. Enter the following Pin Code 1122 to pair.
After successful pairing you will hear a double beep. You
can now play audio from your mobile/device.
Please Note: If the pairing is not successful, switch off
for 10 seconds, switch back on and try again.Each time
the module is switched off and the device is disconnect-
ed it will not reconnect automatically when the module
is switched back on. This allows other devices to connect
to the module.
Re-connecting to a previously paired
device or pairing a new device
Once switched off leave the module switched off for 60
seconds before switching on again to pair to a new de-
vice or to connect to a previously paired device. If when
you switch on you don't hear the triple tone indicating
the module is ready to connect/pair switch off and wait
a further 60 seconds before switching on again. It may
be necessary to unpair the previously connected device
before a new device can be connected.

Troubleshooting

Q1 The sound is low or completely silent.
A1 Make sure your mobile/device is charged.
A2 Make sure your Bluetooth connection is fully
functioning.
A3 Check the volume of your mobile/device and that an
audible audio track is playing.
Q2 My device cannot find the module.
A1 If when you switch on the module you don't hear
the triple tone indicating that the module is ready to
connect/pair, switch off and wait a further 60 seconds.
Switch back on and you should hear the triple tone
and "iStar BTCSK" should appear in your Bluetooth
device list .
A2 Another device may still be connected to the module.
To disconnect the other device switch off the module
for 60 seconds as above and then pair your device.
EN
4 BLUETOOTH CEILING SPEAKER - User Guide

Declaration of Conformity

Hereby, Philex Electronic Ltd. declares that the radio
equipment: model 12302R Bluetooth Speaker Kit for
radio broadcast reception in domestic premises is in
compliance with the Radio Equipment Directive 2014/53/
EU. The full text of the EU declaration of conformity is
available at the following internet address:
www.philex.com/doc

Technical Support

If you experience problems using your speakers please
visit our technical website at www.philex.com/support
to send us a message or live chat during office hours.
WEEE Disposal/Recycling
Waste electrical and electronic products should
not be disposed of with household waste.
Please recycle where facilities exist. Check with
your Local Authority for recycling advice.
www.philex.com/support