Table of Contents

Advertisement

Quick Links

20201020145810_32K1NB000_eng_BOOK Page 1 Tuesday, October 20 2020 15:02:25 JST
This manual should be considered a permanent part of the vehicle
and should remain with the vehicle when it is resold.
This publication includes the latest production information available
before printing. Honda Motor Co., Ltd. reserves the right to make
changes at any time without notice and without incurring any
obligation.
No part of this publication may be reproduced without written
permission.
The vehicle pictured in this owner's manual may not match your
actual vehicle.
© 2020 Honda Motor Co., Ltd.

Advertisement

Table of Contents
loading

Summary of Contents for Honda FSH125 2020

  • Page 1 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
  • Page 2 Congratulations on your purchase of a new The following codes in this manual ● Honda vehicle. Your selection of a Honda indicate each country. makes you part of a worldwide family of The illustrations here in are based on the ●...
  • Page 3 20201020145810_32K1NB000_eng_BOOK Page 3 Tuesday, October 20 2020 15:02:25 JST A Few Words About Safety Your safety, and the safety of others, is very DANGER important. Operating this vehicle safely is an You WILL be KILLED or SERIOUSLY important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING...
  • Page 4: Table Of Contents

    20201020145810_32K1NB000_eng_BOOK Page 4 Tuesday, October 20 2020 15:02:25 JST Contents Vehicle Safety P. 2 Operation Guide P. 18 Maintenance P. 63 Troubleshooting P. 101 Information P. 124 Specifications P. 138...
  • Page 5: Vehicle Safety

    20201020145810_32K1NB000_eng_BOOK Page 5 Tuesday, October 20 2020 15:02:25 JST Vehicle Safety This section contains important information for safe riding of your vehicle. Please read this section carefully. Safety Guidelines ..........P. 3 Image Labels............P. 6 Safety Precautions..........P. 10 Riding Precautions ..........
  • Page 6: Safety Guidelines

    20201020145810_32K1NB000_eng_BOOK Page 6 Tuesday, October 20 2020 15:02:25 JST Safety Guidelines Safety Guidelines Instruct your passenger on holding onto the grab rail or your waist, leaning with you in turns, Follow these guidelines to enhance your safety: and keeping their feet on the footpegs, even Perform all routine and regular inspections when the vehicle is stopped.
  • Page 7 Ride slowly and Keep Your Honda in Safe Condition cautiously. It's important to keep your vehicle properly Your vehicle may have suffered damage that is maintained and in safe riding condition.
  • Page 8 20201020145810_32K1NB000_eng_BOOK Page 8 Tuesday, October 20 2020 15:02:25 JST Safety Guidelines WARNING Carbon Monoxide Hazard Exhaust contains poisonous carbon monoxide, a Running the engine of your vehicle colourless, odorless gas. Breathing carbon while in an enclosed or even partially monoxide can cause loss of consciousness and enclosed area can cause a rapid build- may lead to death.
  • Page 9: Image Labels

    20201020145810_32K1NB000_eng_BOOK Page 9 Tuesday, October 20 2020 15:02:25 JST Image Labels Image Labels Read instructions contained in Owner's The following pages describe the label Manual carefully. meanings. Some labels warn you of potential hazards that could cause serious injury. Read instructions contained in Shop Manual Others provide important safety information.
  • Page 10 20201020145810_32K1NB000_eng_BOOK Page 10 Tuesday, October 20 2020 15:02:25 JST Image Labels BATTERY LABEL DANGER • Keep flame and spark away from the battery. Battery produce explosive gas that can cause explosion. • Wear the eye protection and rubber gloves when handling the battery, or you can get burned or lose your eyesight by the battery electrolyte.
  • Page 11 20201020145810_32K1NB000_eng_BOOK Page 11 Tuesday, October 20 2020 15:02:25 JST Image Labels RADIATOR CAP LABEL DANGER NEVER OPEN WHEN HOT. Hot coolant will scald you. Relief pressure valve begins to open at 108 kPa. ACCESSORIES AND LOADING WARNING LABEL WARNING ACCESSORIES AND LOADING •...
  • Page 12 20201020145810_32K1NB000_eng_BOOK Page 12 Tuesday, October 20 2020 15:02:25 JST Image Labels TYRE INFORMATION & CARGO LIMIT LABEL For your protection, always wear helmet, protective apparel. Cold tyre pressure: [Driver only] Front 175 kPa (1.75 kgf/cm , 25 psi) Rear 200 kPa (2.00 kgf/cm , 29 psi) [Driver and passenger] Front...
  • Page 13: Safety Precautions

    20201020145810_32K1NB000_eng_BOOK Page 13 Tuesday, October 20 2020 15:02:25 JST Safety Precautions Safety Precautions Must fit comfortably but securely, with the ● chin strap fastened. Face shield with unobstructed field of vision Ride cautiously and keep your hands on the ● ●...
  • Page 14: Riding Precautions

    20201020145810_32K1NB000_eng_BOOK Page 14 Tuesday, October 20 2020 15:02:25 JST Riding Precautions Riding Precautions Avoid continuous braking. ● Repeated braking, such as when descending long, steep slopes can Running-in Period seriously overheat the brakes, reducing During the first 500 km (300 miles) of running, their effectiveness.
  • Page 15 To reduce the likelihood of theft, always lock ● the handlebar, lock the ignition switch P. 41) and leave your vehicle while taking the Honda SMART Key with you. Deactivate the Honda SMART Key system if necessary. P. 36 Use of an anti-theft device is also...
  • Page 16 20201020145810_32K1NB000_eng_BOOK Page 16 Tuesday, October 20 2020 15:02:25 JST Riding Precautions Parking with the Side Stand or Centre Left handle grip Centre stand Stand Grab rail Stop the engine. Using the side stand Push the side stand down. Slowly lean the vehicle to the left until its weight rests on the side stand.
  • Page 17 20201020145810_32K1NB000_eng_BOOK Page 17 Tuesday, October 20 2020 15:02:25 JST Riding Precautions Refuelling and Fuel Guidelines Follow these guidelines to protect the engine, fuel system and catalytic converter: Use only unleaded petrol. ● Use recommended octane number. Using ● lower octane petrol will result in decreased engine performance.
  • Page 18: Accessories & Modifications

    We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed for your vehicle by Honda or make Follow all instructions in this owner's modifications to your vehicle from its original manual regarding accessories and design.
  • Page 19: Loading

    20201020145810_32K1NB000_eng_BOOK Page 19 Tuesday, October 20 2020 15:02:25 JST Loading Loading WARNING Overloading or improper loading can Carrying extra weight affects your vehicle's ● cause a crash and you can be seriously handling, braking and stability. hurt or killed. Always ride at a safe speed for the load you are carrying.
  • Page 20 20201020145810_32K1NB000_eng_BOOK Page 20 Tuesday, October 20 2020 15:02:25 JST...
  • Page 21: Operation Guide

    Starting the • Steering Lock (P.34) Vehicle (P.52) • Answer Back System Before pulling away, indicate (P.43) your direction with the turn • Honda SMART Key System signal switch, and check for (P.35) oncoming traffic. • Idling Stop System (P.45)
  • Page 22 20201020145810_32K1NB000_eng_BOOK Page 22 Tuesday, October 20 2020 15:02:25 JST Braking Parking (P.53) (P.12) Close the throttle and apply the front and rear brakes together. Park on a firm level surface. The brakelight will indicate Use the stand, lock the that you have applied the steering.
  • Page 23 20201020145810_32K1NB000_eng_BOOK Page 23 Tuesday, October 20 2020 15:02:25 JST Parts Location Document bag (P.62) Tool kit (P.62) Centre compartment (P.60) Helmet holder (P.59) Front brake fluid reservoir (P.90) Throttle grip (P.97) Front Lid (P.83) EM mode connector (P.113) Shopping hook (P.60) Battery (P.79)
  • Page 24 20201020145810_32K1NB000_eng_BOOK Page 24 Tuesday, October 20 2020 15:02:25 JST Data link connector Rear brake lever (P.92) CBS brake fluid reservoir (P.90) Helmet holder (P.59) Seat (P.58) Fuel fill cap (P.54) Rear carrier (P.58) Rear suspension spring preload adjuster (P.98) Side stand (P.96) Glove box Centre stand...
  • Page 25 20201020145810_32K1NB000_eng_BOOK Page 25 Tuesday, October 20 2020 15:02:25 JST Instruments Speedometer This shows your speed in kilometer per hour (km/h) and/or miles per hour (mph) depend on type. button button Display Check When the ignition switch is turned to the (On) position, all the mode and digital segments will show.
  • Page 26 20201020145810_32K1NB000_eng_BOOK Page 26 Tuesday, October 20 2020 15:02:25 JST Clock (12-hour or 24-hour display) To set the clock: (P.25) Odometer [TOTAL] & Tripmeter [TRIP A/B] button switches between the odometer and tripmeters. • Odometer: Total distance ridden. • Tripmeter: Distance ridden since tripmeter was reset (press and hold button to reset to 0.0 Fuel gauge...
  • Page 27 20201020145810_32K1NB000_eng_BOOK Page 27 Tuesday, October 20 2020 15:02:25 JST Instruments (Continued) OIL CHANGE indicator To reset the OIL CHANGE indicator The indicator is turned on whenever the Press and hold the button while turning running distance reaches the programed oil the ignition switch to the (On) position, and change interval.
  • Page 28 20201020145810_32K1NB000_eng_BOOK Page 28 Tuesday, October 20 2020 15:02:25 JST Display Setting Following items to change or reset Ordinary display sequentially. • Time format setting Time format setting • Clock setting • Backlight brightness adjustment Clock setting • E type only Changing of mileage unit Backlight brightness adjustment E type only...
  • Page 29 20201020145810_32K1NB000_eng_BOOK Page 29 Tuesday, October 20 2020 15:02:25 JST Instruments (Continued) If the ignition switch is turned to the (Off) 1 Time format setting: position or the button is not pressed for You can switch the time format between 12 about 30 seconds, the control is hour format or 24 hour format.
  • Page 30 20201020145810_32K1NB000_eng_BOOK Page 30 Tuesday, October 20 2020 15:02:25 JST 2 Clock setting: Press the button until the desired minute is displayed. Press the button until the desired hour Press and hold the button to is displayed. advance the minute fast. Press and hold the button to advance the hour fast.
  • Page 31 20201020145810_32K1NB000_eng_BOOK Page 31 Tuesday, October 20 2020 15:02:25 JST Instruments (Continued) 3 Backlight brightness adjustment: 4 Changing of mileage unit: You can adjust the brightness to one of five E type only levels. Press the button to select either “km” or “mile”.
  • Page 32 If one of these indicators does not come on when it should, have your dealer check for problems. Honda SMART Key Indicator Comes on when vehicle and Honda SMART Key verification is complete, and the ignition switch can be operated.
  • Page 33 20201020145810_32K1NB000_eng_BOOK Page 33 Tuesday, October 20 2020 15:02:25 JST Indicators (Continued) Left turn signal indicator Right turn signal indicator High beam indicator Idling stop indicator Comes on briefly when the Idling Stop switch in the (Idling stop) position with the ignition switch turned to the (On) position.
  • Page 34 20201020145810_32K1NB000_eng_BOOK Page 34 Tuesday, October 20 2020 15:02:25 JST...
  • Page 35 20201020145810_32K1NB000_eng_BOOK Page 35 Tuesday, October 20 2020 15:02:25 JST Switches Idling Stop switch • : The Idling Stop system is on. • : The Idling Stop system is off. Idling Stop system: (P.45) Turn signal switch Start button Pressing the switch turns the turn signal off.
  • Page 36 This button is used to operate the (Off) Turns engine off. answer back system. Answer back System: (P.43) (Lock) Locks steering. ON/OFF button This button is used to activate or deactivate the Honda SMART Key system, and also to confirm the activation status. (P.36) Continued...
  • Page 37 20201020145810_32K1NB000_eng_BOOK Page 37 Tuesday, October 20 2020 15:02:25 JST Switches (Continued) Steering Lock Locking Turn the handlebar all the way to the right Lock the steering when parking to help or left. prevent theft. Push the ignition switch down, and turn the A U-shaped wheel lock or similar device is ignition switch to the (Lock) position.
  • Page 38 The system runs a two-way authentication between the vehicle and the Honda SMART Key to verify if it is the registered Honda SMART Key. The Honda SMART Key system uses low- intensity radio waves. It may affect medical equipment such as a cardiac pacemaker.
  • Page 39 (Continued) Switching the Honda SMART Key System To switch the Honda SMART Key system to activation or deactivation Press the ON/OFF button until the Honda SMART Key LED changes colour. To check the Honda SMART Key system status ON/OFF button Lightly press the ON/OFF button.
  • Page 40 The Honda SMART Key system uses low- intensity radio waves. Therefore, the operating range may be wider or narrower, or the Honda SMART Key system may not work properly in the following situations: • When the Honda SMART Key battery is depleted.
  • Page 41 (Continued) Anyone can unlock the ignition switch and When the ignition switch is locked: start the engine if your Honda SMART Key is The system can be operated within the within operating range of your vehicle, even shaded area shown in the illustration.
  • Page 42 You should always keep the Honda SMART Key on your person after you get on and off the vehicle or while riding. Do not place the Honda SMART Key in the any compartment. Continued...
  • Page 43 20201020145810_32K1NB000_eng_BOOK Page 43 Tuesday, October 20 2020 15:02:25 JST Honda SMART Key System (Continued) Switching the ignition switch If someone without the Honda SMART Key tries to turn the ignition switch, the ignition To Unlock the Ignition Switch switch rotates freely. If you notice the ignition...
  • Page 44 SEAT (On) to SEAT, (Off) or (Lock) position. • Switch the Honda SMART Key system to inactive. (P.36) Make sure that the Honda SMART Key indicator and ignition switch ring go off, the turn signals flash once. This indicates that the ignition switch is locked.
  • Page 45 20201020145810_32K1NB000_eng_BOOK Page 45 Tuesday, October 20 2020 15:02:25 JST Honda SMART Key System (Continued) Always make sure the ignition switch position is in the (Off) or (Lock) position when you leave your vehicle. When the ignition switch is locked in the...
  • Page 46 Honda SMART Key with the ignition switch in the (Off) or (Lock) position, the turn signals light, and the ignition switch ring lights, informing you of your vehicle's location.
  • Page 47 20201020145810_32K1NB000_eng_BOOK Page 47 Tuesday, October 20 2020 15:02:25 JST Answer Back System (Continued) Operation Press the answer back button on the Honda SMART Key. The answer back system will not function when the ignition switch is in the (On) position.
  • Page 48 20201020145810_32K1NB000_eng_BOOK Page 48 Tuesday, October 20 2020 15:02:25 JST Idling Stop System Idling Stop system is designed to help reduce Activation of the Idling Stop System the fuel consumption and noise, by idling The Idling Stop system becomes ready to stop the engine and Idling Stop indicator stop while making a stop such as waiting at comes on when the following requirements...
  • Page 49 20201020145810_32K1NB000_eng_BOOK Page 49 Tuesday, October 20 2020 15:02:25 JST Idling Stop System (Continued) Stopping the engine by the Idling Stop Safety Precaution for the Idling Stop System System Do not go away from the vehicle while the The engine stops and Idling Stop indicator Idling Stop indicator is flashing.
  • Page 50 20201020145810_32K1NB000_eng_BOOK Page 50 Tuesday, October 20 2020 15:02:25 JST Restarting the Engine NOTICE Check that the Idling Stop indicator is Headlight stays on after the engine is stopped by the Idling Stop system. The battery may flashing, and then open the throttle. discharge and you may not be able to restart If it is not flashing, you can't restart the engine.
  • Page 51 • Extended fast idling and revving the engine running, it will automatically shut off. can damage the engine, and the exhaust This vehicle is equipped with a Honda system. SMART Key system. Always keep Honda • If the vehicle is over-turned, you must first...
  • Page 52 20201020145810_32K1NB000_eng_BOOK Page 52 Tuesday, October 20 2020 15:02:25 JST Place the vehicle on its centre stand. Squeeze the rear brake lever. Turn the ignition switch to the (On) The starter motor will only work when position. the rear brake lever is squeezed and the To unlock the ignition switch.
  • Page 53 20201020145810_32K1NB000_eng_BOOK Page 53 Tuesday, October 20 2020 15:02:25 JST Starting the Engine (Continued) If you cannot start the engine: If you cannot start a warm engine: With the throttle slightly open (about 3 mm Rotate the throttle 1/8 - 1/4 turn while starting without freeplay), press the start button.
  • Page 54 20201020145810_32K1NB000_eng_BOOK Page 54 Tuesday, October 20 2020 15:02:25 JST If the engine does not start: Open the throttle fully and press the start button for 5 seconds. Repeat the normal starting procedure. If the engine starts, open the throttle slightly if idling is unstable.
  • Page 55 20201020145810_32K1NB000_eng_BOOK Page 55 Tuesday, October 20 2020 15:02:25 JST Riding Starting the Vehicle Acceleration and deceleration To accelerate: Open the throttle slowly. Push the vehicle forward off the centre To decelerate: Close the throttle. stand. Squeeze the rear brake lever. Close Open Keep throttle closed.
  • Page 56 20201020145810_32K1NB000_eng_BOOK Page 56 Tuesday, October 20 2020 15:02:25 JST Braking Close the throttle and apply the front and rear brake levers together. Rear brake lever Front brake lever...
  • Page 57 20201020145810_32K1NB000_eng_BOOK Page 57 Tuesday, October 20 2020 15:02:25 JST Refuelling Fuel type: Unleaded petrol only Arrow marks Fuel octane number: Your vehicle is designed to use Research Octane Number (RON) 95 or higher. Tank capacity: 5.6 L (1.48 US gal, 1.23 Imp gal) Refuelling and Fuel Guidelines (P.14) Fuel fill cap...
  • Page 58 20201020145810_32K1NB000_eng_BOOK Page 58 Tuesday, October 20 2020 15:02:25 JST Closing the Fuel Fill Cap Install and tighten the fuel fill cap firmly by turning it clockwise. Make sure that the arrow marks on the fuel fill cap and fuel tank are aligned. Close the seat.
  • Page 59 Use USB devices at your own risk. In no event Open the glove box lid. (P.61) shall Honda be liable for any damage to your Open the cover to access the USB socket. USB device when in use. USB socket...
  • Page 60 20201020145810_32K1NB000_eng_BOOK Page 60 Tuesday, October 20 2020 15:02:25 JST To prevent the battery from becoming weak NOTICE (or dead), keep the engine running while • Using any heat-generating USB devices or drawing current from the USB socket. improperly rated USB devices can damage the USB socket.
  • Page 61 20201020145810_32K1NB000_eng_BOOK Page 61 Tuesday, October 20 2020 15:02:25 JST Storage Equipment Seat Open Seat Turn the handlebar pointed straight ahead. Turn the ignition switch to the SEAT Seat opener position. switch To unlock the ignition switch (P.40) Push the SEAT side of the seat opener switch.
  • Page 62 20201020145810_32K1NB000_eng_BOOK Page 62 Tuesday, October 20 2020 15:02:25 JST WARNING Helmet Holder The helmet holders are located under the Riding with a helmet attached to the seat. holder can interfere with your ability to Use the helmet holders only when parked. safely operate the vehicle and could lead to a crash in which you can be seriously hurt or killed.
  • Page 63 20201020145810_32K1NB000_eng_BOOK Page 63 Tuesday, October 20 2020 15:02:25 JST Storage Equipment (Continued) A helmet can be stored in the centre Shopping Hook compartment. The shopping hook is provided below the Set in the front of the helmet forward. handlebar. Some helmets may not fit in the Do not attach large luggage to the hook compartment due to their size or design.
  • Page 64 20201020145810_32K1NB000_eng_BOOK Page 64 Tuesday, October 20 2020 15:02:25 JST Glove Box Open The glove box is provided below the Pull the glove box lid. handlebar. Close Glove box lid Press forward the glove box lid until it is firmly closed. The maximum allowable load on the glove box shall be no more than 1.0 kg (2.2 lb).
  • Page 65 20201020145810_32K1NB000_eng_BOOK Page 65 Tuesday, October 20 2020 15:02:25 JST Storage Equipment (Continued) Tool Kit Document Bag The tool kit is in the reverse side of the seat The document bag is in the document by the rubber strap. compartment in the centre compartment. Document bag Tool kit Rubber...
  • Page 66: Maintenance

    Adjusting the Rear Suspension ......P. 98 Battery ..............P. 79 Other Replacement........... P. 99 Battery Cover............P. 80 Replacing the Honda SMART Key Battery..P. 99 Battery Lid ............. P. 81 Clip ................P. 82 Front Lid..............P. 83 Fuel Tank Cover and Rear Centre Cover..
  • Page 67: Importance Of Maintenance

    20201020145810_32K1NB000_eng_BOOK Page 67 Tuesday, October 20 2020 15:02:25 JST Importance of Maintenance Importance of Maintenance Maintenance Safety Keeping your vehicle well-maintained is Always read the maintenance instructions absolutely essential to your safety and to before you begin each task, and make sure that protect your investment, obtain maximum you have the tools, parts, and skills required.
  • Page 68: Maintenance Schedule

    Maintenance work should be performed in new owner. accordance with Honda's standards and specifications by properly trained and equipped Honda recommends that your dealer should technicians. Your dealer meets all of these road test your vehicle after each periodic requirements. Keep an accurate record of maintenance is carried out.
  • Page 69 Inspect (clean, adjust, lubricate, or replace, if necessary) dealer, unless you have the necessary tools and are Replace mechanically skilled. Clean Procedures are provided in an official Honda Shop Manual. : Technical. In the interest of safety, have your vehicle serviced by your dealer.
  • Page 70 20201020145810_32K1NB000_eng_BOOK Page 70 Tuesday, October 20 2020 15:02:25 JST Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 68 × 1,000 mi Drive Belt – Final Drive Oil 2 Years – Battery Brake Fluid 2 Years Brake Shoes/Pads Wear...
  • Page 71: Maintenance Fundamentals

    20201020145810_32K1NB000_eng_BOOK Page 71 Tuesday, October 20 2020 15:02:25 JST Maintenance Fundamentals Brakes - Check operation; Pre-ride Inspection ● Front: check brake fluid level and pads wear. To ensure safety, it is your responsibility to P. 90, P. 91 perform a pre-ride inspection and make sure Rear: check shoes wear and freeplay, adjust that any problem you find is corrected.
  • Page 72 20201020145810_32K1NB000_eng_BOOK Page 72 Tuesday, October 20 2020 15:02:25 JST Maintenance Fundamentals WARNING Replacing Parts Always use Honda Genuine Parts or their Installing non-Honda parts may make equivalents to ensure reliability and safety. your vehicle unsafe and cause a crash in...
  • Page 73 20201020145810_32K1NB000_eng_BOOK Page 73 Tuesday, October 20 2020 15:02:25 JST Maintenance Fundamentals What to do in an emergency Battery If any of the following occur, immediately see Your vehicle has a maintenance-free type your doctor. battery. You do not have to check the battery Electrolyte splashes into your eyes: ●...
  • Page 74 If the terminals are starting to corrode and maintenance-free battery of the same type. are coated with a white substance, wash NOTICE with warm water and wipe clean. Installing non-Honda electrical accessories can overload the electrical system, discharging the battery and possibly damaging the system.
  • Page 75 “Specifications.” P. 139 NOTICE If you use non-Honda engine oil, check the Replacing a fuse with one that has a higher label to make sure that the oil satisfies all of the rating greatly increases the chance of damage to following standards: the electrical system.
  • Page 76 The API classification specifies the quality and performance rating of engine oils. Use SG or Recommended brake fluid: higher oils, excluding oils marked as “Energy Honda DOT 3 or DOT 4 Brake Fluid or Conserving” or “Resource Conserving” on the circular API service symbol. equivalent...
  • Page 77 20201020145810_32K1NB000_eng_BOOK Page 77 Tuesday, October 20 2020 15:02:25 JST Maintenance Fundamentals Recommended Coolant Crankcase Breather Pro Honda HP Coolant is a pre-mixed solution Service more frequently when riding in rain, at of antifreeze and distilled water. full throttle, or after the vehicle is washed or overturned.
  • Page 78 20201020145810_32K1NB000_eng_BOOK Page 78 Tuesday, October 20 2020 15:02:25 JST Maintenance Fundamentals Inspecting for Abnormal Wear Tyres (Inspecting/Replacing) Checking the Air Pressure Inspect the tyres for Visually inspect your tyres and use an air signs of abnormal wear pressure gauge to measure the air pressure at on the contact surface.
  • Page 79 20201020145810_32K1NB000_eng_BOOK Page 79 Tuesday, October 20 2020 15:02:25 JST Maintenance Fundamentals Inspecting Tread Depth WARNING Inspect the tread wear indicators. If they Riding on tyres that are excessively become visible, replace the tyres immediately. worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.
  • Page 80 20201020145810_32K1NB000_eng_BOOK Page 80 Tuesday, October 20 2020 15:02:25 JST Maintenance Fundamentals Have your tyres replaced by your dealer. WARNING For recommended tyres and air pressure, see Installing improper tyres on your “Specifications.” P. 139 vehicle can adversely affect handling Follow these guidelines whenever you replace and stability, and can cause a crash in tyres.
  • Page 81: Tool

    20201020145810_32K1NB000_eng_BOOK Page 81 Tuesday, October 20 2020 15:02:25 JST Tool The tool kit is in reverse side of the seat. P. 62 You can perform some roadside repairs, minor adjustments and parts replacement with the provided tools. 8 × 12 mm Open end wrench ●...
  • Page 82: Removing & Installing Body Components

    20201020145810_32K1NB000_eng_BOOK Page 82 Tuesday, October 20 2020 15:02:25 JST Removing & Installing Body Components Battery Removal Make sure the ignition switch is in the Negative terminal (Off) position. Remove the battery cover. P. 80 Positive terminal Disconnect the negative - terminal from the battery.
  • Page 83: Battery Cover

    20201020145810_32K1NB000_eng_BOOK Page 83 Tuesday, October 20 2020 15:02:25 JST Removing & Installing Body Components Battery Cover Battery Cover Removal Remove the battery lid. P. 81 Remove the screws. Slot Screwdriver Use a flat head screwdriver to increase the gap and release the tabs from their Screws slots.
  • Page 84: Battery Lid

    20201020145810_32K1NB000_eng_BOOK Page 84 Tuesday, October 20 2020 15:02:25 JST Removing & Installing Body Components Battery Lid Battery Lid Removal Remove the screws. Screw Remove the battery lid by using a flat head screwdriver covered with a protective cloth. Battery lid Installation Install the parts in the reverse order of removal.
  • Page 85: Clip

    20201020145810_32K1NB000_eng_BOOK Page 85 Tuesday, October 20 2020 15:02:25 JST Removing & Installing Body Components Clip Clip Installation Removal Push the bottom of the centre pin. Insert the clip into the hole. Press down on the centre pin to release Press down on the centre pin to lock the the lock.
  • Page 86: Front Lid

    20201020145810_32K1NB000_eng_BOOK Page 86 Tuesday, October 20 2020 15:02:25 JST Removing & Installing Body Components Front Lid Front Lid Removal Push the side of the front lid. There is a gap at the top of the front lid. Put your finger in the gap at the top of the front lid and pull out the front lid backward.
  • Page 87: Fuel Tank Cover And Rear Centre Cover

    20201020145810_32K1NB000_eng_BOOK Page 87 Tuesday, October 20 2020 15:02:25 JST Removing & Installing Body Components Fuel Tank Cover and Rear Centre Cover Fuel Tank Cover and Rear Removal Centre Cover Open the seat. P. 58 Pull up the centre pin. The clip does not come off a fuel tank Centre pin Fuel tank cover cover.
  • Page 88: Maintenance Lid

    20201020145810_32K1NB000_eng_BOOK Page 88 Tuesday, October 20 2020 15:02:25 JST Removing & Installing Body Components Maintenance Lid Maintenance Lid Maintenance lid Inner cover Clip Prongs Remove the clip. P. 82 Prongs Remove the maintenance lid by releasing the prongs from their slots. Removal Installation Remove the inner cover by releasing the...
  • Page 89: Engine Oil

    20201020145810_32K1NB000_eng_BOOK Page 89 Tuesday, October 20 2020 15:02:25 JST Engine Oil Checking the Engine Oil Oil fill cap/dipstick Upper level Check the engine oil with the Idling Stop switch at (Idling). If the engine is cold, idle the engine for 3 to 5 minutes.
  • Page 90 20201020145810_32K1NB000_eng_BOOK Page 90 Tuesday, October 20 2020 15:02:25 JST Engine Oil Adding Engine Oil Adding Engine Oil NOTICE Overfilling with oil or operating with insufficient oil can cause damage to your engine. Do not mix If the engine oil is below or near the lower different brands and grades of oil.
  • Page 91: Coolant

    20201020145810_32K1NB000_eng_BOOK Page 91 Tuesday, October 20 2020 15:02:25 JST Coolant Checking the Coolant UPPER level mark Reserve tank Check the coolant level in the reserve tank while the engine is cold. Place your vehicle on a firm, level surface. Hold your vehicle in an upright position. Open the seat.
  • Page 92 20201020145810_32K1NB000_eng_BOOK Page 92 Tuesday, October 20 2020 15:02:25 JST Coolant Adding Coolant Adding Coolant Clip If the coolant level is below the LOWER level mark, add the recommended coolant P. 74) until the level reaches the UPPER level mark. Add fluid only from the reserve tank cap and do not remove the radiator cap.
  • Page 93: Brakes

    20201020145810_32K1NB000_eng_BOOK Page 93 Tuesday, October 20 2020 15:02:25 JST Brakes Checking Brake Fluid Front brake Front brake fluid reservoir Place your vehicle in an upright position on a firm, level surface. Check that the brake fluid reservoir is horizontal and that the fluid level is: above the LWR mark.
  • Page 94 20201020145810_32K1NB000_eng_BOOK Page 94 Tuesday, October 20 2020 15:02:25 JST Brakes Inspecting the Front Brake Pads Inspecting the Front Brake Pads Wear indicators Check the condition of the brake pad wear Disc indicators. The pads need to be replaced if a brake pad is worn to the bottom of the indicator.
  • Page 95 20201020145810_32K1NB000_eng_BOOK Page 95 Tuesday, October 20 2020 15:02:25 JST Brakes Inspecting the Rear Brake Lever Freeplay Inspecting the Rear Brake Lever Check the brake cable for kinks or signs of wear. If necessary have it replaced by your Freeplay dealer. Lubricate the brake cable with a Place the vehicle on its centre stand.
  • Page 96 20201020145810_32K1NB000_eng_BOOK Page 96 Tuesday, October 20 2020 15:02:25 JST Brakes Adjusting the Rear Brake Lever Freeplay Adjusting the Rear Brake Lever Adjust by turning the rear brake adjusting nut a half-turn at a time. Freeplay Adjust the freeplay of the brake lever with the front wheel pointed straight ahead.
  • Page 97 20201020145810_32K1NB000_eng_BOOK Page 97 Tuesday, October 20 2020 15:02:25 JST Brakes Adjusting the Rear Brake Lever Freeplay Push the brake arm to confirm that there is a gap between the rear brake adjusting nut and brake arm pin. Brake arm Push Brake arm pin Adjusting nut After adjustment, confirm the freeplay of the...
  • Page 98 The rear brake is equipped with a brake wear the brake, the brake shoes must be replaced. indicator. See your dealer for this service. Brake panel Arrow When the brake service is necessary, see your dealer. Use only Honda Genuine Parts or its equivalent. Brake arm Reference mark...
  • Page 99: Side Stand

    20201020145810_32K1NB000_eng_BOOK Page 99 Tuesday, October 20 2020 15:02:25 JST Side Stand Checking the Side Stand Sit on the vehicle and raise the side stand. Start the engine. Lower the side stand all the way. The Side stand spring engine should stop as you lower the side stand.
  • Page 100: Throttle

    20201020145810_32K1NB000_eng_BOOK Page 100 Tuesday, October 20 2020 15:02:25 JST Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open in all steering positions and throttle freeplay is correct. If the throttle does not move smoothly, close automatically, or if the cable is damaged, have the vehicle inspected by your dealer.
  • Page 101: Other Adjustments

    20201020145810_32K1NB000_eng_BOOK Page 101 Tuesday, October 20 2020 15:02:25 JST Other Adjustments Adjusting the Rear Suspension Pin spanner 1 2 3 4 5 Spring Preload You can adjust the spring preload by the adjuster to suit the load or the road surface. Use the pin spanner and the extension bar to turn the adjuster.
  • Page 102: Other Replacement

    Key Battery with a protective cloth into the slit. Wrap a coin or a screwdriver with a If the Honda SMART Key indicator flashes 5 protective cloth to prevent scratching times when the ignition switch is turned to the Honda SMART Key.
  • Page 103 20201020145810_32K1NB000_eng_BOOK Page 103 Tuesday, October 20 2020 15:02:25 JST Other Replacement Replacing the Honda SMART Key Battery WARNING Upper case Battery Chemical Burn Hazard: do not swallow battery. If swallowed, the battery can cause Protective severe internal burns and even death.
  • Page 104: Troubleshooting

    Engine Does Not Start Even If the Throttle is Overheating (High coolant temperature Opened ............. P. 109 indicator is on) ..........P. 103 When the Honda SMART Key System Does Not Warning Indicators On or Flashing..... P. 104 Operate Properly........... P. 110 PGM-FI (Programmed Fuel Injection) Unlock the Seat in an Emergency ....
  • Page 105: Engine Will Not Start

    20201020145810_32K1NB000_eng_BOOK Page 105 Tuesday, October 20 2020 15:02:25 JST Engine Will Not Start Starter Motor Operates But Starter Motor Does Not Engine Does Not Start Operate Check the following items: Check the following items: Check the correct engine starting Check the correct engine starting ●...
  • Page 106: Overheating (High Coolant Temperature Indicator Is On)

    20201020145810_32K1NB000_eng_BOOK Page 106 Tuesday, October 20 2020 15:02:25 JST Overheating (High coolant temperature indicator is on) The engine is overheating when the following Stop the engine using the ignition switch. occurs: Allow the engine to cool with the ignition High coolant temperature indicator switch in the (Off) position.
  • Page 107: Warning Indicators On Or Flashing

    20201020145810_32K1NB000_eng_BOOK Page 107 Tuesday, October 20 2020 15:02:25 JST Warning Indicators On or Flashing PGM-FI (Programmed Fuel Injection) Malfunction Indicator Lamp (MIL) If the indicator comes on while riding, you may have a serious problem with the PGM-FI system. Reduce speed and have your vehicle inspected by your dealer as soon as possible.
  • Page 108: Honda Smart Key Indicator

    It is probably caused by the following: Strong radio waves or noise are affecting ● If you do not have the Honda SMART Key, the system the ignition switch can be unlocked in You lose the Honda SMART Key while ●...
  • Page 109: Other Warning Indications

    20201020145810_32K1NB000_eng_BOOK Page 109 Tuesday, October 20 2020 15:02:25 JST Other Warning Indications Fuel Gauge Failure Indication If the fuel system has an error, the fuel gauge indicators will be displayed as shown in the illustration. If this occurs, see your dealer as soon as possible.
  • Page 110: When The Idling Stop System Does Not Operate Properly

    20201020145810_32K1NB000_eng_BOOK Page 110 Tuesday, October 20 2020 15:02:25 JST When the Idling Stop System Does Not Operate Properly Idling Stop Indicator Does Not If PGM-FI malfunction indicator lamp (MIL) lights: Come On When the PGM-FI malfunction indicator lamp (MIL) lights, the Idling Stop system does not When the Idling Stop indicator does not operate for protection of the engine.
  • Page 111: Engine Is Not Stopped By The Idling Stop System While The Idling Stop Indicator Is On

    20201020145810_32K1NB000_eng_BOOK Page 111 Tuesday, October 20 2020 15:02:25 JST When the Idling Stop System Does Not Operate Properly Engine is Not Stopped by the Idling Stop System While the Idling Stop Indicator is On Engine is Not Stopped by the Idling Stop System While the Idling Stop Indicator is On When the engine is not stopped by the Idling...
  • Page 112: Engine Does Not Start Even If The Throttle Is Opened

    20201020145810_32K1NB000_eng_BOOK Page 112 Tuesday, October 20 2020 15:02:25 JST When the Idling Stop System Does Not Operate Properly Engine Does Not Start Even If the Throttle is Opened Engine Does Not Start Even If procedure ( P. 48) for standard engine starting.
  • Page 113: When The Honda Smart Key System Does Not Operate Properly

    20201020145810_32K1NB000_eng_BOOK Page 113 Tuesday, October 20 2020 15:02:25 JST When the Honda SMART Key System Does Not Operate Properly When the Honda SMART Key system does Check that there is no communication ● not work properly, perform the following. failure in the Honda SMART Key system.
  • Page 114 20201020145810_32K1NB000_eng_BOOK Page 114 Tuesday, October 20 2020 15:02:25 JST When the Honda SMART Key System Does Not Operate Properly Check that a registered Honda SMART Check the battery condition and battery ● ● Key is used. lead in your vehicle.
  • Page 115: Unlock The Seat In An Emergency

    20201020145810_32K1NB000_eng_BOOK Page 115 Tuesday, October 20 2020 15:02:25 JST Unlock the Seat in an Emergency The seat lock can be unlocked by using the Emergency seat opener emergency key. Open Remove the front lid. P. 83 Align the projection of the emergency key with the slot of the emergency seat opener, and turn the emergency key counterclockwise.
  • Page 116: Unlock The Ignition Switch In An Emergency

    20201020145810_32K1NB000_eng_BOOK Page 116 Tuesday, October 20 2020 15:02:25 JST Unlock the Ignition Switch in an Emergency Set up to ID number input mode Hook Remove the front lid. P. 83 Pull out the EM mode connector. Remove the blue dummy coupler by releasing the tab of the EM mode connector while lifting the hook of the blue dummy coupler.
  • Page 117 20201020145810_32K1NB000_eng_BOOK Page 117 Tuesday, October 20 2020 15:02:25 JST Unlock the Ignition Switch in an Emergency ID number input Example: To input “0”, wait for 5 seconds without ● You can input your ID number by pressing the pushing the ignition switch when the ignition switch when the ignition switch is ignition switch ring comes on.
  • Page 118 ID number input failure After the last ID number is inputted, through, After the last ID number is inputted, the the ignition switch ring and Honda SMART ignition switch ring and Honda SMART Key Key Indicator will flash every 2 seconds until Indicator will flash every second until the EM the EM mode coupler is removed.
  • Page 119: Tyre Puncture

    20201020145810_32K1NB000_eng_BOOK Page 119 Tuesday, October 20 2020 15:02:25 JST Tyre Puncture Repairing a puncture or removing a wheel WARNING requires special tools and technical expertise. Riding your vehicle with a temporary We recommend you have this type of service tyre repair can be risky. If the temporary performed by your dealer.
  • Page 120: Electrical Trouble

    20201020145810_32K1NB000_eng_BOOK Page 120 Tuesday, October 20 2020 15:02:25 JST Electrical Trouble Battery Goes Dead Burned-out Light Bulb Charge the battery using a motorcycle Follow the procedure below to replace a battery charger. burned-out light bulb. Remove the battery from the vehicle before Turn the ignition switch to the (Off) or charging.
  • Page 121 20201020145810_32K1NB000_eng_BOOK Page 121 Tuesday, October 20 2020 15:02:25 JST Electrical Trouble Burned-out Light Bulb Brakelight/Taillight and Rear Turn Signal Bulb Rear combi light Screws B License plate light cover Prong A Screw Prong B Screw B Screw B Screw A Remove the rear combi light by removing Prongs A the screws B and the prong B.
  • Page 122 20201020145810_32K1NB000_eng_BOOK Page 122 Tuesday, October 20 2020 15:02:25 JST Electrical Trouble Burned-out Light Bulb Brakelight/Taillight Bulb Turn the socket A counterclockwise and pull it out. Slightly press the bulb in and turn it counterclockwise. Install a new bulb and parts in the reverse order of removal.
  • Page 123 20201020145810_32K1NB000_eng_BOOK Page 123 Tuesday, October 20 2020 15:02:25 JST Electrical Trouble Burned-out Light Bulb Front Turn Signal Bulb When remove the right turn signal bulb Remove the front lid. P. 83 Right side Socket When remove the left turn signal bulb Bulb Remove the maintenance lid.
  • Page 124 20201020145810_32K1NB000_eng_BOOK Page 124 Tuesday, October 20 2020 15:02:25 JST Electrical Trouble Burned-out Light Bulb License Plate Light Bulb Remove the license plate light cover. P. 118 Remove the cover by removing the screws. Packing Bulb Pull out the bulb without turning it. Cover Install a new bulb and parts in the reverse order of removal.
  • Page 125: Blown Fuse

    20201020145810_32K1NB000_eng_BOOK Page 125 Tuesday, October 20 2020 15:02:25 JST Electrical Trouble Blown Fuse Blown Fuse Remove the battery cover. P. 80 Pull the main fuse and other fuses out Before handling fuses, see “Inspecting and one by one with the fuse puller furnished Replacing Fuses.”...
  • Page 126: Unstable Engine Operation Occurs Intermittently

    20201020145810_32K1NB000_eng_BOOK Page 126 Tuesday, October 20 2020 15:02:25 JST Unstable Engine Operation Occurs Intermittently If the fuel pump filter is clogged, unstable engine operation will occur intermittently while riding. Even if this symptom occurs, you can continue to ride your vehicle. If unstable engine operation occurs even if sufficient fuel is available, have your vehicle inspected by your dealer as soon as possible.
  • Page 127: Information

    20201020145810_32K1NB000_eng_BOOK Page 127 Tuesday, October 20 2020 15:02:25 JST Information Service Diagnostic Recorders....... P. 125 Keys..............P. 125 Instruments, Controls, & Other Features... P. 129 Caring for Your Vehicle........P. 129 Storing Your Vehicle........P. 132 Transporting Your Vehicle ......P. 133 You &...
  • Page 128: Service Diagnostic Recorders

    However this data may be accessed by Honda, its authorised dealers and authorised repairers, employees, representatives and contractors only for the purpose of the technical diagnosis, research and development of the vehicle.
  • Page 129 ● heavy objects on them. Protect the Honda SMART Key from direct ● The ID number of the Honda SMART Key is on sunlight, high temperature, and high the ID tag. You can also unlock the ignition humidity. switch by inputting the ID number.
  • Page 130 ● the Honda SMART Key system. Do not wash in an ultrasonic cleaner. ● If fuel, wax, or grease adhere to the Honda ● To get an additional Honda SMART Key, take SMART Key, wipe it off immediately to avoid the Honda SMART Key and the vehicle to your cracking or warping.
  • Page 131 20201020145810_32K1NB000_eng_BOOK Page 131 Tuesday, October 20 2020 15:02:25 JST Keys EU Directive South Africa only Singapore only This Honda SMART Key system complies with the RE (Radio Equipment) Directive (2014/53/ EU). Morocco only The declaration of conformity to RE Directive is provided to the owner at the time of purchase.
  • Page 132: Instruments, Controls, & Other Features

    Instruments, Controls, & Caring for Your Vehicle Other Features Frequent cleaning and polishing is important to ensure the life of your Honda. A clean vehicle Ignition Switch makes it easier to spot potential problems. Leaving the ignition switch in the (On) position In particular, seawater and salts used to prevent with the engine stopped will drain the battery.
  • Page 133 20201020145810_32K1NB000_eng_BOOK Page 133 Tuesday, October 20 2020 15:02:25 JST Caring for Your Vehicle Thoroughly rinse your vehicle with plenty of Washing Precautions clean water and dry with a soft, clean cloth. Follow these guidelines when washing: After the vehicle dries, lubricate any moving Do not use high-pressure washers: ●...
  • Page 134 20201020145810_32K1NB000_eng_BOOK Page 134 Tuesday, October 20 2020 15:02:25 JST Caring for Your Vehicle Do not direct water at the air cleaner: Aluminium Components ● Water in the air cleaner can prevent the Aluminium will corrode from contact with dirt, engine from starting. mud, or road salt.
  • Page 135: Storing Your Vehicle

    20201020145810_32K1NB000_eng_BOOK Page 135 Tuesday, October 20 2020 15:02:25 JST Storing Your Vehicle Storing Your Vehicle Panels Follow these guidelines to prevent scratches If you store your vehicle outdoors, you should and blemishes: consider using a full-body cover. Wash gently using a soft sponge and plenty ●...
  • Page 136: Transporting Your Vehicle

    20201020145810_32K1NB000_eng_BOOK Page 136 Tuesday, October 20 2020 15:02:25 JST Transporting Your Vehicle Transporting Your Vehicle If your vehicle needs to be transported, it should be carried on a motorcycle trailer or a flatbed truck or trailer that has a loading ramp or lifting platform, and motorcycle tie-down straps.
  • Page 137: You & The Environment

    20201020145810_32K1NB000_eng_BOOK Page 137 Tuesday, October 20 2020 15:02:25 JST You & the Environment You & the Environment Recycle Wastes Put oil and other toxic wastes in approved Owning and riding a vehicle can be enjoyable, containers and take them to a recycling centre. but you must do your part to protect the Call your local or state office of public works or environment.
  • Page 138: Serial Numbers

    20201020145810_32K1NB000_eng_BOOK Page 138 Tuesday, October 20 2020 15:02:25 JST Serial Numbers Serial Numbers Frame number The frame and engine serial numbers uniquely identify your vehicle and are required in order to register your vehicle. They may also be required when ordering replacement parts. To check the frame number, remove the fuel tank cover and rear centre cover.
  • Page 139: Fuels Containing Alcohol

    20201020145810_32K1NB000_eng_BOOK Page 139 Tuesday, October 20 2020 15:02:25 JST Fuels Containing Alcohol Fuels Containing Alcohol The use of petrol containing more than 10% ethanol may: Some conventional fuels blended with alcohol Damage the painting of the fuel tank. ● are available in some locales to help reduce Damage the rubber tubes of the fuel line.
  • Page 140: Catalytic Converter

    A defective catalytic converter contributes to air pollution and can impair your engine's performance. A replacement unit must be an original Honda part or equivalent.
  • Page 141: Specifications

    20201020145810_32K1NB000_eng_BOOK Page 141 Tuesday, October 20 2020 15:02:25 JST Specifications Main Components ■ Displacement 125 cm (7.6 cu-in) Overall length 1,950 mm (76.8 in) Bore x stroke 52.5 x 55.5 mm (2.07 x 2.19 in) Overall width 670 mm (26.4 in) Compression ratio 11.5:1 Unleaded petrol...
  • Page 142 0.14 L (0.15 US qt, 0.12 Imp qt) disassembly Snow Not permitted Recommended Moped Not permitted Honda DOT 3 or DOT 4 Brake Fluid brake fluid Front 175 kPa (1.75 kgf/cm , 25 psi) Tyre air pressure Recommended Pro Honda HP Coolant...
  • Page 143 20201020145810_32K1NB000_eng_BOOK Page 143 Tuesday, October 20 2020 15:02:25 JST Specifications Bulbs ■ Headlight Brakelight/Taillight 12 V-21/5 W Front turn signal 12 V-10 W × 2 Rear turn signal 12 V-10 W × 2 License plate light 12 V-5 W Position light Fuses ■...

Table of Contents