Boil-Dry Protection - Faber FCK 110SS Instruction Manual

NOTE: Ensure that the On/Off switch is free of
obstructions and the lid is firmly closed, the
kettle will not turn off if the switch is
constrained or if the lid is opening.
5. Lift the kettle from the power base and then pour the
water.
NOTE: Operate carefully when pouring the water
from your kettle as boiling water may result in
scald, besides, don't open the lid while the
water in the kettle is hot.
6. The kettle will not re-boil until the On/Off switch is
pressed down again. The kettle may be stored on
the power base when not in use.
NOTE: Always disconnect the power supply
when not use.

BOIL-DRY PROTECTION

Should you accidentally let the kettle operate without
water, the boil-dry protection will automatically switch
off the power. If this occurs, allow the kettle to cool
before filling with cold water to reboil.
7