Download Print this page

Faber FCK 135 Instruction Manual

Advertisement

Quick Links

INSTRUCTION MANUAL
FCK 135
220-240V~ 50/60Hz
1850-2200W, 1.7L
Read this manual thoroughly before using and save it for future reference

Advertisement

loading

Summary of Contents for Faber FCK 135

  • Page 1 INSTRUCTION MANUAL FCK 135 220-240V~ 50/60Hz 1850-2200W, 1.7L Read this manual thoroughly before using and save it for future reference...
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read all instructions before using. 2. Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside the kettle & base) corresponds with the voltage in your home. If this is not the case, contact your dealer and stop using the kettle. 3.
  • Page 3 children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety. 12. Children should be supervised to ensure that they do not play with the appliance.
  • Page 4 person in order to avoid a hazard. 22. Do not use the appliance for other than intended use. 23. The kettle can only use with the stand provided. 24. If the kettle is overfilled, boiling water may spill out. 25. Always ensure the lid is closed and do not lift it while the water is boiling.
  • Page 5 KNOW YOUR PLASTIC KETTLE BEFORE USING YOUR KETTLE If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling the Max capacity of water once and then discarding the water. Wipe the surface with damp cloth.
  • Page 6 amount of water, and then close the lid. Alternatively, the kettle may be filled through the spout. The water level should not exceed MAX marks or sit below MIN level. Too little water will cause the kettle switching off before the water has boiled.
  • Page 7: Boil-Dry Protection

    down again. The kettle may be stored on the power base when not in use. NOTE: Always disconnect the power supply when not use. BOIL-DRY PROTECTION Should you accidentally let the kettle operate without water, the boil-dry protection will automatically switch off the power. If this occurs, allow the kettle to cool before filling with cold water to reboil.
  • Page 8: Removal Of Mineral Deposits

    REMOVAL OF MINERAL DEPOSITS Your kettle should be periodically descaled as the mineral deposits in tap water may form scale at the bottom of kettle interior so as to cause the operation less efficiency. You can use the commercially available descaler and follow the instructions on the package of descaler.