Related Manuals for Faber FCK 101
Summary of Contents for Faber FCK 101
- Page 1 Cordless Jug Kettle INSTRUCTION MANUAL FCK 101 Read this manual thoroughly before using and save it for future reference...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read all instructions before using. 2. Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside the kettle & base) corresponds with the voltage in your home. If this is not the case, contact your dealer and stop using the kettle. - Page 3 with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety. 12. Children should be supervised to ensure that they do not play with the appliance.
- Page 4 22. Do not use the appliance for other than intended use. 23. The kettle can only use with the stand provided. 24. If the kettle is overfilled, boiling water may spill out. 25. Always ensure the lid is closed and do not lift it while the water is boiling.
- Page 5 KNOW YOUR WATER KETTLE BEFORE USING YOUR KETTLE If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling the Max capacity of water once and then discarding the water. Wipe the surface with damp cloth. NOTE: The max capacity of kettle is 1.0L.
- Page 6 pressing the lid release button, fill with the desired amount of water, and then close the lid. Alternatively, the kettle may be filled through the spout. The water level should not exceed MAX marks or sit below MIN level. Too little water will cause the kettle switching off before the water has boiled.
-
Page 7: Boil-Dry Protection
again. The kettle may be stored on the power base when not in use. NOTE: Always disconnect the power supply when not use. BOIL-DRY PROTECTION Should you accidentally let the kettle operate without water, the boil-dry protection will automatically switch off the power. If this occurs, allow the kettle to cool before filling with cold water to re-boil. -
Page 8: Removal Of Mineral Deposits
REMOVAL OF MINERAL DEPOSITS Always disconnect the appliance from the power outlet and cool it down completely before cleaning. 1. Never immerse the kettle, power cord or power base in water, or allow moisture to contact with these parts. 2. Wipe the appearance of body with a damp cloth or cleaner, never use a poisonous cleaner.