Advertisement
Quick Links
ENGLISH
Installation instructions
MEMOLUB
PRECAUTIONS
• Do not open the housing: loaded spring
• Hold MEMOLUB
®
down during manual checks
• Leq < 70 dB
• Use MEMOLUB
only for greasing machinery
®
• Use only lubricant cartridges and batteries recommended by the manufacturer
CONTENTS
Technical information .................................................................................................................................page 2
A
Replacing cartridge .....................................................................................................................................page 3
B
Direct installation ..........................................................................................................................................page 3
C
Remote installation ...................................................................................................................................... page 4
D
Check Function ............................................................................................................................................. page 4
ONE
®
Advertisement
Related Manuals for MEMOLUB ONE
Summary of Contents for MEMOLUB ONE
- Page 1 ENGLISH Installation instructions MEMOLUB ® PRECAUTIONS • Do not open the housing: loaded spring • Hold MEMOLUB ® down during manual checks • Leq < 70 dB • Use MEMOLUB only for greasing machinery ® • Use only lubricant cartridges and batteries recommended by the manufacturer CONTENTS Technical information ..........................page 2...
- Page 2 TECHNICAL INFORMATION Settings of the Memo Color Emptying time of cartridge Average daily output 0,65 white months / day months / day green months / day yellow months / day ≈ 1 stroke with manual grease gun 1 cm Dimensions 240 cm 10 ring 101 mm...
- Page 3 REPLACING CARTRIDGE Open (fingers on ribs) Prime MEMOLUB Insert new battery pack ® and seal Squeeze air out of cartridge Replace cartridge Close and lock (fingers on ribs) DIRECT INSTALLATION BSP1/4 Prime lube point Screw in Memo using Install MEMOLUB ®...
- Page 4 Install Memo and F1/4 fitting and remove nipple 90° Screw BSP 1/8 fitting Cut hose to required size Insert hose into quick fitting Insert hose into quick fitting Install MEMOLUB on Memo MEMOLUB works immediately ® ® CHECK FUNCTION To check unit: unscrew...
Need help?
Do you have a question about the ONE and is the answer not in the manual?
Questions and answers