Page 1
’ WNER ANUAL LCD TV Monitor 15MF200V/37 AGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS ABOUT YOUR NEW PRODUCT YOU THROUGH EATURES ALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT R VISIT US ON THE WEB AT WWW...
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
EMOTE ONTROL Point the remote control toward the remote sensor on the front of the LCD TV Monitor when operating the LCD TV Monitor with the remote. ATTERY NSTALLATION Remove the battery compart- ment lid on the back of the remote.
Video Source button Press to select the video input source: PC/Video/TV. Sleep button Press to set the LCD TV Monitor to turn itself off within a certain time. Details are on page 23. Status button Press to display the current system status (ie, channel).
300- to 75-ohm adapter. Connect the antenna (or adapter) to the TV jack on the rear of the LCD TV Monitor. If the end of the antenna wire is threaded, screw it down finger tight.
IN jack (or RF IN or CABLE IN) on the Cable Box. Connect an RF coaxial cable (not supplied) to the OUT jack (or TO TV or RF OUT) of the Cable Box. Connect the other end of the coaxial cable to the LCD TV Monitor’s TV jack.
Connect a VCR, DVD Player, Video Game, Camcorder, etc., to these jacks. To view the material play- ing on the other equipment, set the LCD TV Monitor to its VIDEO input channel. Connect an RCA-style video cable...
AUDIO cable (provided). Connect the AUDIO cable provided to the AUDIO 2 jack on the rear of the LCD TV Monitor. The LCD TV Monitor will receive sound from the other equip- ment in stereo (from the left and right sound channels).
LCD TV Monitor can be used as a PC Monitor. Your computer will have to be equipped with a VGA type video output and VGA cable. Connect one end of the VGA Video cable to the Monitor (video) output on the computer to the ANALOG rear jack panel on the LCD TV Monitor.
TUNER MODE allows you to change the LCD TV Monitor’s signal input to CABLE or AIR (antenna). It’s important for the LCD TV Monitor to know if you want to receive channels from a cable TV signal or an antenna signal.
LCD TV Monitor can automatically set itself for local area (or cable TV) channels. This makes it easy for you to select only the TV stations in your area by pressing the CH UP or CH DN button. Press the MENU button on the remote control to show the onscreen menu.
LCD TV Monitor’s memory. Press the MENU button repeatedly to clear the menu from the screen. Repeat steps 1-7 to add or delete addi- tional channels to or from the LCD TV Monitor Monitor’s memory. TORE TV INSTALL SMART SURF...
(CH UP) or (CH DN) buttons highlight the TV INSTALL menu. Press the (VOL+) or (VOL-) but- tons to enter the TV Install Menu. Press the (CH UP) or (CH DN) buttons to select SMART SURF. Press the (VOL+) or (VOL-) but-...
Tune allows you to adjust the LCD TV Monitor’s picture reception in areas of weak signal reception. Press the MENU button on the remote control to see the onscreen menu. Press the (CH UP) or (CH DN) buttons to highlight the TV INSTALL menu.
Sharpness: Adjust to improve detail. Backlight: Adjust the brightness of the pic- ture while preserving the picture’s color. Gamma: Preset contrast scheme to enhance picture quality. Choose from NORMAL, VIVID1, or VIVID2. TV P ICTURE PICTURE BRIGHTNESS COLOR CONTRAST TINT...
Sound Mode: Adjust to select between Stereo, Mono, or SAP. NOTE: If stereo is not present on a selected show and the TV is placed in Stereo mode, the sound coming from the TV will remain in Mono mode.
When programmed by the viewer, a TV with Smart Lock can respond to the content advisories and block program content that may be found objectionable (such as offensive language, violence, sexual situations, etc.).
Press the (VOL+) or (VOL-) but- tons. INPUT USER CODE will appear on the screen. Use the Number buttons to enter 9, 2, 0, 3. This is the LCD TV ---- MONITOR’s default code. “ appear on the screen as you enter the code.
ELPFUL If you enter your Access Code to view a blocked channel, ALL blocked channels will be viewable until you turn off the TV. Channels will be blocked as before when you turn on the TV again. When you set one of the ratings (Movie or TV) to ON, Block Enable will automatical- ly turned on.
Smart Lock feature can block program- ming based on the TV Industry ratings. Once you’ve entered your access code and the Smart Lock features are displayed on the screen: Press the MENU button to see the onscreen menu. Press the...
TV can be set to automatically turn itself off at a given amount of time. Press the SLEEP button on the remote control and the SLEEP timer display will appear on the screen. Press the SLEEP button repeatedly to...
Captioning (CC) allows you to read the voice content of television pro- grams on the TV screen. Designed to help the hearing impaired, this feature uses onscreen “text boxes” to show dialogue and conversa- tions while the TV program is in progress.
English or Spanish-speaking TV own- ers, an onscreen LANGUAGE option is present. The LANGUAGE control enables you to set the TV’s onscreen menu to be shown in either English or Spanish. Press the MENU button on the remote control to see the onscreen menu.
Press the MENU button repeatedly to clear the menu from the screen. NOTE: If you reset the TV to the factory set- tings, you must make any changes that you had previously made to TV INSTALL, PIC- TURE, SOUND, AND FEATURES.
TV can also be used as a PC Monitor. A PC video signal must be present or the TV will go into standby mode. The Picture controls allow you to adjust the picture. Press the MENU button on the remote control to see the onscreen menu.
TV can also be used as a PC Monitor. A PC video signal must be present or the TV will go into standby mode. The Image Adjust con- trols allow you to adjust the image as it appears on the screen.
TV can also be used as a PC Monitor. A PC video signal must be present or the TV will go into standby mode. The Sound controls allow you to adjust the sound. Press the MENU button on the remote control to show the onscreen menu.
TV can also be used as a PC Monitor. A PC video signal must be present or the TV will go into standby mode. The Color controls allow you to adjust the color. Press the MENU button on the remote control to see the onscreen menu.
TV can also be used as a PC Monitor. A PC video signal must be present or the TV will go into standby mode. The Feature controls allow you to adjust the picture. Press the MENU button to see the onscreen menu.
• Press the MUTE button on the remote control to cancel or restore the volume. • If you have connected other equipment to the TV (such as a VCR or DVD Player), make sure the audio cables are connected securely between the TV and the other equipment.
• DVD menus list DVD content. • Letterbox black bars appear at the top and bottom of the TV screen when a wide screen (16:9) movie is viewed on a TV with standard (4:3) aspect ratio. This is available with some DVDs.
MAGNAVOX LIMITED WARRANTY Ninety (90) Days Free Product Exchange MAGNAVOX warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to exchange the product.