Subscribe to Our Youtube Channel
Related Manuals for Itec IDA 4
Summary of Contents for Itec IDA 4
- Page 1 POWER AMPLIFIER ITEC IDA 4 / IDA 8 MANUAL Designed and Manufactured by ITEC Tontechnik und Industrieelektronik GesmbH 8200 Laßnitzthal 300 Austria / Europe IDA 4 / IDA 8_EN_2022/12_REV_2023/04...
-
Page 2: Dear Customer
ITEC IDA 4 / IDA 8 - INTRODUCTION Dear Customer! The IDA amplifi er series is ITEC‘s latest digital amplifi er solution, specially designed for use with fi xed installations, which thanks to innovative technology represents a highly effi cient and therefore particular- ly energy-saving solution that can also cover a high power density with a small housing size. -
Page 3: Safety Instructions
ITEC IDA 4 / IDA 8 Safety instructions Please read this instruction manual carefully before installation and putting the “ITEC IDA” amplifi er into operation. Keep this document easy to fi nd on a safe place to have it available as a later reference. - Page 4 ITEC IDA 4 / IDA 8 - FRONT VIEW Designation Description 1 / 7 Operate/Mute/Standby green = normal mode yellow = muted red = switched off INFORMATION 2-5 / 8-11 CH1-4 Signal/Clip green = input signal CH5-8 Signal/Clip yellow = clipping...
- Page 5 ITEC IDA 4 / IDA 8 IDA-4 8-11 www.itec-audio.com IDA 4 / IDA 8_EN_2022/12_REV_2023/04...
-
Page 6: Terminal Designation
ITEC IDA 4 / IDA 8 - BACK VIEW Terminal designation Terminal Block Des. Description Terminal Block Switch Des. Description IN 1+ Analog audio input 1, positive IN 1&2 IN 1 on channel 1&2 Signal ground IN 1&3 IN 1 on channel 1&3... - Page 7 ITEC IDA 4 / IDA 8 www.itec-audio.com IDA 4 / IDA 8_EN_2022/12_REV_2023/04...
- Page 8 Variants IDA 4 and IDA 8 diff er in the number of modules that can be used. These modules are completely independent in terms of function and connection terminals. With the IDA 4 either a 4x150W or a 4x750W module can be installed. The IDA 8 has two of these modules.
- Page 9 ITEC IDA 4 / IDA 8 4x single Mode switch Input Output channel 1 channel 2 channel 3 channel 4 1x bridged Mode switch Input Output channel 1 channel 2 channel 3 2x bridged (BTL) Mode switch Input Output channel 1...
- Page 10 ITEC IDA 4 / IDA 8 The mode switch can also be used to switch a signal to several speaker lines. Mode switch Input Output channel 1 channel 3 channel 4 Mode switch Input channel 1+2+3 channel 4 Mode switch...
- Page 11 ITEC IDA 4 / IDA 8 www.itec-audio.com IDA 4 / IDA 8_EN_2022/12_REV_2023/04...
- Page 12 ITEC IDA 4 / IDA 8 - SPECIFICATIONS 88,5 mm m 325 mm 482 mm Min. Typ. Max. Output power (IDA 4-600) 4x 150W@4Ohm Output power (IDA 4-3000) 4x 750W@4Ohm Output power (IDA 8-1200) 8x 150W@4Ohm Output power (IDA 8-3600)
Need help?
Do you have a question about the IDA 4 and is the answer not in the manual?
Questions and answers