Table of Contents
Advertisement
Button, rocker
(a)
Operating rockers (accessory)
(b)
Status LED
(c)
Cover frame (accessory)
1...4
Push-buttons assignment and status LED
Rear view (see figure 3)
(d)
Device connection terminal KNX
(e)
Opening for removing the KNX connection terminal with screwdriver
(f)
Retaining spring for mounting in supporting frame
3
Function
System information
This device is a product of the KNX system and complies with the KNX directives.
Detailed technical knowledge obtained in KNX training courses is a prerequisite to
proper understanding.
The function of this device depends upon the software. Detailed information on load-
able software and attainable functionality as well as the software itself can be ob-
tained from the manufacturer´s product database.
The device can be updated. Firmware can be easily updated with the Gira ETS Ser-
vice App (additional software).
The device is KNX Data Secure capable. KNX Data Secure offers protection against
manipulation in building automation and can be configured in the ETS project. De-
tailed specialist knowledge is required. A device certificate, which is attached to the
device, is required for safe commissioning. During mounting, the device certificate
must be removed from the device and stored securely.
Planning, installation and commissioning of the device are carried out with the aid of
the ETS, version 5.7.3 and above.
32402912
10870237
Image 3: Device components
12.12.2022
4 / 13
Advertisement
Table of Contents
