Detergents And Care Products; Basic Operation; Switching On The Appliance; Setting A Programme - Bosch WNA264U9IN User Manual And Installation Instructions

Table of Contents

Advertisement

en operation
operation
13 Basic operation
operation
13.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 11
Turn the programme selector to a
programme.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 25
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 30
13.3 Adjusting the pro-
gramme settings
Requirement: A programme is set.
→ "Setting a programme", Page 30
Adjust the programme settings.
→ "Buttons", Page 23
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 25
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 29
¡ The drum is empty.
30
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Adding detergent and
care product
Note: Observe the information about

detergents and care products

→ Page 29.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 17
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.6 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 30
Press
⁠   Start/Pause.
1.
a The display shows the programme
duration or the "Ready in" time.
a After the programme has ended,
the display shows: End.
If the display shows
2.
is not spun. The water is pumped
out after the rinse cycle.
Notes
¡ If you do not remove the laundry
once the programme has ended,
the crease-reduction function starts
after 15 minutes and takes approx.
30 minutes. The display shows 0:
00, ⁠   ⁠   ⁠ , ⁠   and End alternately,
and
appears.
Press any button on the display to
cancel the crease-reduction pro-
gramme and to remove the laun-
dry.
¡ If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
, the laundry

Advertisement

Table of Contents
loading

Table of Contents