en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The heavy weight of the appliance may result in injury when lifted. ▶...
Page 7
Safety en ▶ If the appliance or the power cord is damaged, immediately un- plug the power cord or switch off the fuse in the fuse box and turn off the water tap. ▶ Call customer services. → Page 44 An ingress of moisture can cause an electric shock. ▶...
Page 8
en Safety ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Highly flammable objects such as lighters or matches may ignite during the drying process. ▶ Remove all highly flammable objects from any pockets in your laundry before the drying process.
Safety en Reaching into the drum while it is still turning may cause hand in- juries. ▶ Wait for the drum to come to a complete stop before reaching inside. CAUTION ‒ Risk of scalding! When you wash at high temperatures, the detergent solution gets hot.
Page 10
en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
Preventing material damage en Make sure that the valve housing ▶ Preventing material damage 2 Preventing material for the water inlet hose does not come into contact with its sur- damage roundings and is not subjected to any external forces. Preventing material damage ATTENTION! Ensure that the inner diameter of ▶...
en Environmental protection and saving energy Do not use cleaning products with Reduce the washing temperature for ▶ a high alcohol content. lightly and normally soiled laundry. Do not use hard scouring pads or ▶ a At lower temperatures, the appli- cleaning sponges.
Installation and connection en Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 28 Installation and connection Note: The appliance has undergone 4.1 Unpacking the appliance a function test at the factory. This may cause water stains in the appli- ATTENTION! ance, which the first wash cycle re-...
en Installation and connection Pull the hoses out of the holders. Installation loca- Requirements tion Base Secure the appli- ance with fixing brackets. Wooden joist Place the appli- floor ance on a water- resistant wooden board (minimum Unscrew and remove all of thickness of the screws for the 4 transit bolts 30 mm) which is...
Installation and connection en Remove the 4 sleeves. 4.5 Connecting the appliance Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). Push the 4 cover caps downwards. Open the water tap carefully and check that the connection points are tight.
en Installation and connection Note: Observe the draining heights. 4.6 Aligning the appliance The draining heights are: minimum: In order to reduce noise and vibra- 60 cm, maximum: 100 cm tion and to prevent the appliance Siphon Secure the con- from moving, align the appliance cor- nection point with rectly.
Before using for the first time en Use a WAF 17 wrench to tighten Pour approx. 1 litre of tap water the lock nuts against the housing into compartment II. until they are hand-tight. Add washing powder containing In doing so, hold the foot tight and oxygen bleach to compartment II.
en Familiarising yourself with your appliance Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
Familiarising yourself with your appliance en Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 24 Programme selector → Page 29...
en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Program end time → "Buttons", Page 22 Recommendation for the maximum load capacity for the selected program in kg.
Page 21
Display en Display Description Programme status: Drying Programme status: Crease-reduction function ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ance has been operated. → "Deactivating the childproof lock", Page 31 The crease-reduction function is activated. → "Buttons", Page 22 Prewash is activated.
en Buttons Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection Description Temperature - 90 Adjust the temperature. Set temperature in °C. Spin Speed - 1400 Adjust the spin speed or deactivate the spin cycle.
Page 23
Buttons en Button Selection Description Speed ¡ Activate → "Childproof lock", Page 31 Perfect and ¡ Deactivate Finish in/ Time Dry Drying Tar- Drying Target ¡ When Drying Target is selected, ¡ drying is activated after washing. ¡...
en Programmes Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. Max. load load (kg) (kg) Dry- Wash Cottons Wash hard-wearing items made of cotton, linen or blended fabrics. Also suitable as a short programme for nor- mally soiled laundry when you activate ...
Page 25
Programmes en Programme Description Max. Max. load load (kg) (kg) Dry- Wash ¡ Max. 1400 rpm Mixed Wash items made from cotton, linen, or syn- Load thetic or blended fabrics. Suitable for lightly soiled laundry. Programme setting: ¡ Max. 60 °C ¡...
Page 26
en Programmes Programme Description Max. Max. load load (kg) (kg) Dry- Wash Sportswear Wash sports and leisure items made from synthetic fibres, microfibre or fleece. Use a detergent that is suitable for sports items. Do not use fabric softener. Tip: Use the Easy Care programme to wash heavily soiled laundry.
Page 27
Programmes en Programme Description Max. Max. load load (kg) (kg) Dry- Wash ¡ Max. 1000 rpm Speed Perfect activated Drying not possible Washing not possible...
en Accessories Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 44. Order num- Elbow Secure the water outlet hose in place. 00655300 Platform Install the appliance at a raised height so WMZP- that it can be easily loaded and unloaded.
Basic operation en Adjust the programme settings. Notes ▶ ¡ When using liquid detergents, only → "Buttons", Page 22 use liquid detergents that are self- Note: The programme settings are flowing not saved permanently for the pro- ¡ Do not mix different liquid deter- gramme.
en Basic operation a The display shows the programme During the drying cycle, the appli- duration or the programme end ance checks whether it is possible time. to add laundry. a After the programme has ended, Note: If you want to add laundry, the display shows: End.
Dryness level en 13.12 Switching off the appli- Dryness Description level ance creasing after drying, Turn the programme selector to iron the laundry or Off. hang it up. Turn off the tap. Wipe the rubber gasket dry and re- 14.1 Changing the dryness move any foreign objects.
en Basic settings Press on both Speed Perfect 16.2 Changing the basic set- ▶ Finish in/Time Dry buttons tings for approx. three seconds. Set the programme selector to po- So that the programme currently sition 1. → Page 32 running is not cancelled, the pro- gramme selector must be set to Press ...
Cleaning and servicing en for caring for the inside of the ap- Clean the detergent drawer and in- pliance. sert with water and a brush, and then dry them. → "Accessories", Page 28 17.2 Cleaning the detergent drawer Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer.
en Cleaning and servicing Take the drain hose out of the 17.3 Cleaning the drain pump holder. Clean the drain pump regularly, at least once a year, as well as in the event of faults, e.g. blockages or rat- tling noises. Emptying the drain pump Turn off the tap.
Page 35
Cleaning and servicing en Insert the drain hose into the Clean the interior, the thread on holder. the pump cap and the pump hous- ing. Cleaning the drain pump Ensure that the impeller in the drain pump can rotate. Requirement: The drain pump is empty.
Page 36
en Cleaning and servicing Screw the pump cap as far as it will go. The handle on the pump cap must be in a vertical position. Insert and close the maintenance flap. Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run a suitable programme for draining after you have emptied...
Troubleshooting en Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶...
Page 38
en Troubleshooting Fault Cause and troubleshooting "E:30 / -10", The filters in the water inflow are blocked. "H:95" and End. Clean the filters in the water inflow. ▶ The water pressure is low. Check whether the tap has sufficient water pres- ▶...
Page 39
Troubleshooting en Fault Cause and troubleshooting Drum cleaning is required. Clean the drum. → Page 32 ▶ All other error codes. Malfunction Restart the appliance. If the fault occurs again, disconnect the appliance from the power supply for at least 30 seconds. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box.
Page 40
en Troubleshooting Fault Cause and troubleshooting The appliance is vi- Appliance is not correctly aligned. brating, 'wandering' Align the appliance. → Page 16 ▶ and making loud The appliance feet are not fixed. noises during the spin Secure the appliance's feet. → Page 16 ▶ cycle.
Page 41
Troubleshooting en Fault Cause and troubleshooting Fluff on the laundry. Fluff has accumulated in the drum. Start the Cottons 90℃ programme without any ▶ laundry or detergent. The laundry is too wet A low spin speed is selected. after the spinning Start the ...
Page 42
en Troubleshooting Fault Cause and troubleshooting Creasing. Observe the programme's maximum load capacity. ▶ → Page 24 Prepare the laundry. → Page 28 ▶ The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
Transportation, storage and disposal en 18.1 Emergency release 19.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 34 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage.
en Customer Service 19.4 Disposing of old appli- Customer Service 20 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health!
Consumption values en Consumption values 21 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values specified for programmes other than Eco 40-60 are only given as a guide and were determined in accordance with the applicable stand- ards EN60456 and EN62512.
en Technical data Programme Load Pro- Energy Water Max- Spin Resid- (kg) gramm con- con- imum speed e dura- sump- sump- temper- (rpm) mois- tion tion tion (l/ ature ture (hr:min (kWh/ cycle) (°C) 5 cycle) mins Wool 0:41 0.215 41.5 48.00...
Page 48
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the WNA134U8GB and is the answer not in the manual?
Questions and answers