Advertisement
Quick Links
Advertisement
Related Manuals for Bosch WNA2440ZGC
Summary of Contents for Bosch WNA2440ZGC
- Page 1 Washer dryer WNA2440ZGC [en] User manual and installation instructions...
- Page 2 Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 22 1.1 General information.... 4 9 Programmes ...... 24 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories...... 28 1.4 Safe installation ...... 5 11 Laundry........ 28 1.5 Safe use ........
- Page 3 15 Childproof lock...... 32 15.1 Activating the childproof lock ........ 32 15.2 Deactivating the childproof lock ........ 33 16 Basic settings...... 33 16.1 Overview of the basic set- tings........ 33 16.2 Changing the basic set- tings........ 33 17 Cleaning and servicing ... 34 17.1 Cleaning the drum....
- Page 4 en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
- Page 5 Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
- Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
- Page 7 Safety en ▶ If the appliance or the power cord is damaged, immediately un- plug the power cord or switch off the fuse in the fuse box and turn off the water tap. ▶ Call customer services. → Page 49 An ingress of moisture can cause an electric shock. ▶...
- Page 8 en Safety ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Highly flammable objects such as lighters or matches may ignite during the drying process. ▶ Remove all highly flammable objects from any pockets in your laundry before the drying process.
- Page 9 Safety en Reaching into the drum while it is still turning may cause hand in- juries. ▶ Wait for the drum to come to a complete stop before reaching inside. CAUTION ‒ Risk of scalding! When you wash at high temperatures, the detergent solution gets hot.
- Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
- Page 11 Preventing material damage en Make sure that the valve housing ▶ Preventing material damage 2 Preventing material for the water inlet hose does not come into contact with its sur- damage roundings and is not subjected to any external forces. Preventing material damage ATTENTION! Ensure that the inner diameter of ▶...
- Page 12 en Environmental protection and saving energy Do not use cleaning products with Reduce the washing temperature for ▶ a high alcohol content. lightly and normally soiled laundry. Do not use hard scouring pads or ▶ a At lower temperatures, the appli- cleaning sponges.
- Page 13 Installation and connection en Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 28 Installation and connection Note: The appliance has undergone 4.1 Unpacking the appliance a function test at the factory. This may cause water stains in the appli- ATTENTION! ance, which the first wash cycle re-...
- Page 14 en Installation and connection If the appliance is tilted at an angle 4.4 Removing the transit greater than 40°, residual water may bolts leak out of the appliance and cause material damage. The appliance is secured for trans- Tilt the appliance carefully. portation using transit bolts on the ▶...
- Page 15 Installation and connection en Remove the power cable from the Push the 4 cover caps downwards. holder. Note: To install the transit bolts to Remove the 4 sleeves. transport the appliance, perform these steps again in the reverse or- der. 4.5 Connecting the appliance Connecting the water inlet hose WARNING Risk of electric shock!
- Page 16 en Installation and connection Insert the mains plug of the appli- Water outlet connection types ance's power cable in a socket This information is intended to help nearby. you to connect this appliance to the The connection details of the appli- water outlet.
- Page 17 Before using for the first time en Use a WAF 17 wrench to tighten Pour approx. 1 litre of tap water the lock nuts against the housing into compartment II. until they are hand-tight. Add washing powder containing In doing so, hold the foot tight and oxygen bleach to compartment II.
- Page 18 en Familiarising yourself with your appliance Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
- Page 19 Familiarising yourself with your appliance en Measuring aid for liquid deter- gent → "Inserting the measuring aid", Page 29 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
- Page 20 en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Program end time → "Buttons", Page 22 Recommendation for the maximum load capacity for the selected program in kg.
- Page 21 Display en Display Description Programme status: Drying Programme status: Crease-reduction function ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ance has been operated. → "Deactivating the childproof lock", Page 33 (Easy iron كوي The crease-reduction function is activated.
- Page 22 en Buttons Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection Description Temp. ℃ - 90 Adjust the temperature. Set temperature in °C. الحرارة Spin Speed - 1400 Adjust the spin speed or deactivate the spin cycle.
- Page 23 Buttons en Button Selection Description Speed Per- ¡ Activate → "Childproof lock", Page 32 fect & Ready ¡ Deactivate in/ Time Dry وقت خالل جاهز .التجفيف Drying Aim The dryness level defines how damp ¡ or dry the laundry is after the pro- التجفيف هدف ¡...
- Page 24 en Programmes Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. Max. load load (kg) (kg) Dry- Wash Cottons مالبس Wash hard-wearing items made of cotton, linen or blended fabrics. قطن ي ّة Also suitable as a short programme for nor- mally soiled laundry when you activate Speed Perfect.
- Page 25 Programmes en Programme Description Max. Max. load load (kg) (kg) Dry- Wash ¡ Max. 1400 rpm Mixed Load Wash items made from cotton, linen, or syn- thetic or blended fabrics. متنوع Suitable for lightly soiled laundry. Programme setting: ¡ Max. 60 °C ¡...
- Page 26 en Programmes Programme Description Max. Max. load load (kg) (kg) Dry- Wash Sportswear Wash sports and leisure items made from synthetic fibres, microfibre or fleece. رياضة مالبس Use a detergent that is suitable for sports items. Do not use fabric softener. Tip: Use the Easy Care pro- اصطناعية...
- Page 27 Programmes en Programme Description Max. Max. load load (kg) (kg) Dry- Wash ¡ Max. 1200 rpm Speed Perfect activated Drying not possible Washing not possible...
- Page 28 en Accessories Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 49. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx.
- Page 29 Detergents and care products en Turn the programme selector and Detergents and care products 12 Detergents and care set the required programme. → "Programmes", Page 24 products If required, adjust the programme The manufacturer's instructions for Detergents and care products settings. use and dosage can be found on the → "Adjusting the programme set- packaging.
- Page 30 en Basic operation Press down on the insert and re- Slide the measuring aid forwards. move the detergent drawer. Fold the measuring aid down and Insert the measuring aid. click it into place. 13.6 Using the measuring aid 13.7 Adding detergent and care product To more easily measure the liquid detergent, you can use a measuring Note: Observe the information about...
- Page 31 Basic operation en a The drum rotates and load detec- 13.10 Adding laundry tion takes place. This can take up After the programme starts, you can to 2 minutes, after which water remove or add laundry depending on enters the drum. the programme status. a The display shows the programme Press Start/Reload duration or the programme end...
- Page 32 en Dryness level 13.13 Unloading the laundry Dryness Description level Open the door. For normal, single- Remove the laundry from the layered laundry. drum. The laundry is still slightly damp after 13.14 Switching off the appli- the programme ance ends. To prevent creasing after drying, Turn the programme selector to iron the laundry or Off/.إيقاف...
- Page 33 Basic settings en 15.2 Deactivating the child- Set the volume of the signal tone emitted when the but- proof lock tons are pressed: Requirement: To deactivate the 0 (off) to 4 (very loud) childproof lock, the appliance must Activate (On) or deactivate be switched on. (OFF) the reminder to clean the drum.
- Page 34 en Cleaning and servicing Press down on the insert and re- Cleaning and servicing 17 Cleaning and servi- move the detergent drawer. cing To keep your appliance working effi- Cleaning and servicing ciently for a long time, it is important to clean and maintain it carefully. 17.1 Cleaning the drum CAUTION Risk of injury!
- Page 35 Cleaning and servicing en Fit the insert and click it into place. Open and remove the mainten- ance flap. Clean the opening for the deter- gent drawer. Slide a sufficiently large container under the opening. Push in the detergent drawer. Take the drain hose out of the holder.
- Page 36 en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 35 hot. Since water may remain in the Do not touch the hot detergent ▶...
- Page 37 Cleaning and servicing en Insert the pump cap. Before the next wash Ensure that the parts of the To prevent unused detergent from ‒ pump cap are correctly as- flowing straight into the outlet in the sembled. next wash, run a suitable programme for draining after you have emptied the drain pump.
- Page 38 en Troubleshooting Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
- Page 39 Troubleshooting en Fault Cause and troubleshooting "E:36 / -10" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
- Page 40 en Troubleshooting Fault Cause and troubleshooting "E:35 / -10" Call the after-sales service. ▶ → "Customer Service", Page 49 lights up. The temperature is too high. Wait until the temperature has dropped. ▶ Cancel the programme. ▶ → "Cancelling the washing programme", Page 31 Water level is too high. Select a suitable programme for draining.
- Page 41 Troubleshooting en Fault Cause and troubleshooting Creasing. Remove the laundry from the drum as soon as the drying programme has finished. Spread the items of laundry for cooling. Unsuitable programme for the type of fabric. Set the suitable programme for the type of fabric. ▶...
- Page 42 en Troubleshooting Fault Cause and troubleshooting The water is not drain- Drain pipe or water drain hose is caught or jammed. ing. Ensure that the drain pipe and water drain hose are ▶ not kinked or trapped. Drain pump is blocked. → "Cleaning the drain pump", Page 35 ▶...
- Page 43 Troubleshooting en Fault Cause and troubleshooting The spin cycle runs The unbalanced load detection system eliminates an several times. imbalance by repeatedly redistributing the laundry. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
- Page 44 en Troubleshooting Fault Cause and troubleshooting High spin speed not Note: Where possible, mix large and small items in reached. the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Spin .عصرprogramme. ▶ The spin programme Drain pipe or water outlet hose is blocked.
- Page 45 Troubleshooting en Fault Cause and troubleshooting The spin result is not The unbalanced load detection system has interrupted satisfactory. The laun- the spin cycle because the laundry is unevenly distrib- dry is too wet/too uted. damp. Redistribute the laundry in the drum. ▶...
- Page 46 en Troubleshooting Fault Cause and troubleshooting Drum jerks after the This is caused by an internal motor test. programme starts. Not a fault – no action required. ▶ Detergent or fabric Too much detergent/fabric softener in the detergent softener drips off the drawer.
- Page 47 Troubleshooting en Fault Cause and troubleshooting The laundry is too Always select the highest possible spin speed for ▶ damp. the washing programme in question. Thick and multi-layered fabrics require a longer drying time. Set a timed programme for the subsequent drying. ▶...
- Page 48 en Transportation, storage and disposal 18.1 Emergency release 19.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 35 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage.
- Page 49 Customer Service en 19.4 Disposing of old appli- Customer Service 20 Customer Service ance Detailed information on the warranty Customer Service Valuable raw materials can be re- period and terms of warranty in your used by recycling. country is available from our after- sales service, your retailer or on our WARNING website.
- Page 50 en Customer Service from water damage, the appliance must be connected to the power supply. ¡ The liability guarantee is valid for the service life of the appliance. ¡ A claim can only be made under the guarantee if the appliance has been correctly installed and con- nected with Aqua-Stop according to our instructions;...
- Page 51 Consumption values en Consumption values 21 Consumption values The indicated consumption values are approximate. Consumption values The values may deviate from the indicated values depending on water pres- sure, water hardness, water inlet temperature, room temperature, type of laun- dry, amount and soiling of laundry, detergent used, fluctuations in the mains voltage and selected settings.
- Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the WNA2440ZGC and is the answer not in the manual?
Questions and answers